540488
51
Zoom out
Zoom in
Previous page
1/84
Next page
7-10
IM 1F5B2-01E
7.5 Self-checking
7.5.1 Checking for Failures
(1) Checking for Failures Using the BT200
Verify that:
• BT200 is connected correctly;
• BT200 is operating correctly; and
• Parameters are configured correctly;
while referring to the following examples of failures.
Connect the BT200 to
ULTRA YEWFLO and
press the key.
After the screen on the left
appears, press the
key.
ENTER
Example 1: Failure in Connection
FEED
Check cable connection.
Press the ENTER key.
BRAIN terminal
ID :
UTEL
ON/OFF
Communication failure.
Since communication is
not possible if the BT200 is
improperly connected to
ULTRA YEWFLO, the
message on the left
appears. Recheck the
connection. After
rechecking, press the
key (ESC).
F4
Example 2: Failure in Configuration of Parameters
OK
The Default Data screen
shows the current results
of a self-check on ULTRA
YEWFLO.
Pressing the key
(DIAG) on the Parameters
screen enters the self-
check screen “x60: SELF
CHECK.”
ESC
F2
Parameters
01 : MODEL
ULTRA YF
02 : TAG NO.
FIC–01
03 : SELF CHECK
ERROR
DIAG
DATA
PRNT
Parameters
B10 : TAG NO.
FIC–01
B20 : SIZE
25mm
B21 : PRESS RATING
L PRESS
ESC
FEED
PRNT
Self-check
B60 : SELF CHECK
ERROR
< ERROR >
< SPAN SET ERROR >
The Self-check screen
shows an error message if
there is an error.
ESC
(2) Checking for Failures Using the Indicator/Totalizer Component
NOTE
If any failure is found as a result of self-checking, the display of the indicator/totalizer
component shows an error number. If there is more than one failure, the display
changes from one error number to another at two-second intervals. For details on the
meanings of error numbers, see Table 7.5.1.
Figure 7.5-1 Checking for Failures Using the Indicator/Totalizer Component
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yokogawa UYFA21 Ultrasonic Vortex Flowmeter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yokogawa UYFA21 Ultrasonic Vortex Flowmeter in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info