540489
20
Zoom out
Zoom in
Previous page
1/84
Next page
4-7
IM 1F5B2-01E
4. MOUNTING
4.2 Mounting ULTRA YEWFLO
When mounting ULTRA YEWFLO, position it in such a manner that the direction in
which the process fluid is flowing matches the direction of flow indicated on ULTRA
YEWFLO’s body. For information on how to rotate the indicator/totalizer component,
see Section 4.3.
4.2.1 Mounting a Wafer Type of ULTRA YEWFLO
•When mounting a wafer type of ULTRA YEWFLO in a pipeline, make sure that
ULTRA YEWFLO is lined up with the pipeline along its central axis.
Stud bolts and nuts (material: SUS304) for mounting are supplied with ULTRA
YEWFLO upon request (specify suffix code “/BLT” for this optional feature).
If you are planning to procure stud bolts by yourself, refer to Table 4.2 that summa-
rizes their required outer diameters as classified by the standards for flanges.
It is always the user’s responsibility to procure gaskets for flowmeter mounting (see
Figure 4.2-1). (In order to prevent gaskets from protruding into the flow path, use
gaskets with pre-cut bolt holes whenever possible.)
Table 4.2 Mounting Studs for ULTRA YEWFLO’s Wafer Type
lanimoN
retemaiD
fosgnitaR
segnalF
tloBdutS
retemaiDretuO
)mm(
)mm(htgneL
mm52
).ni1(
K02,K01SIJ
051ISNA
003ISNA
61
7.21
9.51
061
551
061
mm04
).ni2/11(
K02,K01SIJ
051ISNA
003ISNA
61
7.21
1.91
061
551
071
mm05
).ni2(
K02,K01SIJ
051ISNA
003ISNA
61
9.51
9.51
002
002
002
mm08
).ni3(
K01SIJ
K02SIJ
051ISNA
003ISNA
61
02
9.51
1.91
022
042
042
042
mm001
).ni4(
K01SIJ
K02SIJ
051ISNA
003ISNA
61
02
9.51
1.91
022
042
042
042
stlobdutsehtfoshtgneletamixorppaehtera'htgneL'rednusrebmunehT
ehtybdeificepssaawagokoYybdeilppus TLB .edocxiffus
riehtecnisnekatebtsumerac,flesruoyybstlobdutsgnirucorpnehW
steksagdnastunehtfossenkcihtehtnognidnepedseiravhtgnelderiuqer
.desu
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yokogawa UYF200 Ultrasonic Vortex Flowmeter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yokogawa UYF200 Ultrasonic Vortex Flowmeter in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info