785688
12
Zoom out
Zoom in
Previous page
1/40
Next page
DS1054-057A P12
If no program exactly meets your needs, choose the
program that comes closest and press a second time
to access the program profile edit.
The time indicator shows 00:00, the temperature level
icon (T1, T2 or T3) and the vertical bar corresponding
to the time flash. Press button or to change the
temperature level and button to move on to the next
hour. Set the desired temperature level for each hour of
the day.
For each hour, it is also possible to delay the start of
adjustment by 15’, 30’ or 45’ minutes. After setting the
temperature as described above, press and hold the
button for 3 seconds to set a delay. The minute
indicator will start flashing. Using button or set
the delay time and press button to confirm and move
to the time hour.
6.
7.
8.
When the program has been edited as required, go back to the day selection page by pressing button
twice and repeat, if necessary, the operations described above for the other days of the week. When all the
changes have been made, exit the configuration menu by holding the button pressed.
7.3. CHANGE TEMPERATURES (T1), T2, T3
This menu can be used to change the three automatic operation temperatures.
Proceed as follows to edit the program:
On the operating screen, hold button pressed for three seconds. The icon will start flashing on the
display.
Briefly press button until the symbol flashes. Press button to access the parameter editing function.
The icon will stop flashing.
Once all the parameters have been set, press the button to exit and return to the programming menu.
The icon will stop flashing. To exit and go back to normal operation, hold pressed or wait for the
timeout (approx. 40 seconds).
(*)IMPORTANT!:
T1 cannot be configured in cooling mode.
The set temperature values must comply with the condition: (T1)* ≤ T2 ≤ T3.
9.
1.
2.
6.
The T1 temperature value will flash. Change the value using
buttons and and press the button to confirm and
go to editing T2.
Change the value using buttons and and press the
button to confirm and go to editing T3.
Change the value using buttons and and press the
button to go back to the T1 temperature editing page.
3.
4.
5.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yokis Thermarp 5454489 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yokis Thermarp 5454489 in the language / languages: English as an attachment in your email.

The manual is 15.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yokis Thermarp 5454489

Yokis Thermarp 5454489 User Manual - German - 40 pages

Yokis Thermarp 5454489 User Manual - Dutch - 40 pages

Yokis Thermarp 5454489 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info