Manual Yoder YS-640 - PELLET SMOKER (page 18 of 46) (English)

637880

Zoom out

Zoom in

1/46

Yoder YS 640

8. Reinstall the cooking grates and optional second shelf (See FIG 8).

9. Inspect chimney stack to be certain that the internal end of the stack is installed

even with the grill body.

10. Remove, inspect and clean the grease bucket as needed. Reinstall the grease

bucket under the right side of the grill.

11. Open the hopper lid and inspect for any foreign materials.

12. Continue to Startup Procedure.

HEAT DIFFUSER/

DRIP PLATE

AUGER

SHIELD

END OF STACK FLUSH

WITH BODY.

END OF STACK FLUSH

WITH BODY.

7. Reinstall the heat diuser/drip plate. The heat diuser plate attaches to the hook on

the auger shield and rests on the grease divider on the right hand side of the grill. Once

installed check to be certain that the edges are approximately one-quarter inch be-

low the grate rails at the hopper end and that the plate is adjusted evenly from front to

back. (The diuser is angled toward the right side of the grill to channel grease into the

grease container.)

FIG 12

FIG 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yoder YS-640 - PELLET SMOKER in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yoder YS-640 - PELLET SMOKER Manual

Product: