725487
7
Zoom out
Zoom in
Previous page
1/15
Next page
-
- 6 -
-
Operating methods
Timer setting
1. Setting of timer off
When the air conditioner is running, press this button, the timer LED lamp is on, and
meanwhile 88 Nixie tube will flicker for 5 times, at the moment, press UP and
DOWN to adjust time from 0.5h to 24h. Within 3h of timer, up/down adjustment once
only changes 0.5h, between 3~24h of timer, up/down adjustment once changes 1h.
When the set time expires, the air conditioner turns off automatically.
2. Setting timer on
When the air conditioner is in standby state, press TIMER, the timer LED lamp is on,
and meanwhile 88 Nixie tube will flicker for 5 times, at the moment press
UP/DOWN to adjust the desired time, and the method of adjustment is the same as
that during timer off. During setting of timer, the operating modes after start can be
selected, if COOL or HEAT mode is selected, the set temperature can be adjusted
simultaneously; after the set time expires, the air conditioner starts automatically and
runs in the selected operating mode.
3. Change of the set time
In the running process of timer, if you are intended to change the existing timer, you
can press TIMER once, at the moment 88 Nixie tube will flicker and display the
remaining time, during flicker pressing UP/DOWN can increase/decrease time on the
basis of the original time. If you press TIMER again during flicker, the set time will
be cancelled, namely timer quits.
Operation of operating modes
1. COOL and HEAT modes
In on or timer on state press MODE to select COOL or HEAT mode. At the
moment the corresponding LED on panel displays.
Press UP/DOWN to set appropriate temperature in a range of 18~30
(64-86
).
When UP or DOWN is pressed once, temperature will go up or down by 1
or 1
every time.
Press SPEED to select appropriate speed, and LOW and HIGH speeds can be
circularly selected.
After selecting COOL or HEAT mode, press SLEEP on remote control (or press
UP and TIMER on operating panel simultaneously) to enter SLEEP mode, both upper
and lower fans are forcibly set at LOW speed. Setting the timing time from 0.5 to 12
hours based on your requirements, after which it will be automatically turned off. If
SLEEP is to be cancelled, press SLEEP again or conversion mode to cancel the sleep
functions.
2. DEHUMIDIFY mode
In on or timer on state press MODE to select DEHUMIDIFY mode. At the
moment the corresponding indicator lamp is on.
Temperature and speed are not adjustable.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yoau 7000 BTU Portable AirConditioning at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yoau 7000 BTU Portable AirConditioning in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info