638629
129
Zoom out
Zoom in
Previous page
1/146
Next page
Edition: 06 / 2015 Page 129 / 146
VARMAX - Installation, Use and Maintenance
Line
No.
Programme Access Control range Default value
Customer
setting
726 Heating curve adaptation S Off | On Off
730 Summer/winter heating limit E 8 … 30 °C 19 °C
732 24-hour heating limit S -10 … 10 °C -3 °C
740 Flow temp setpoint min C 8 … 95 °C 8 °C
741 Flow temp setpoint max C 8 … 95 °C 80 °C
742 Flow temp setpoint room stat S 8 … 95 °C 65 °C
746 Delay heat request C 0 ... 600 s 0 s
750 Room influence S 1 … 100 % 20 %
760 Room temp limitation S 0,5 … 4 °C 1 °C
770 Boost heating S 0 … 20 °C 3 °C
780 Quick setback S Off | Down to reduced setpoint |
Down to frost prot setpoint
Off
790 Optimum start control max S 00:00 … 06:00 00:00
791 Optimum stop control max S 00:00 … 06:00 00:00
800 Reduced setp increase start S -30 … 10 °C -5 °C
801 Reduced setp increase end S -30 … 10 °C -15 °C
809 Continuous pump operation S No | Yes No
820 Overtemp prot pump circuit S Off | On On
830 Mixing valve boost S 0 … 50 °C 3 °C
832 Actuator type S 2-position | 3-position 3-position
833 TOR Switching differential S 0 … 20 °C 2 °C
834 Actuator running time S 30 … 873 s 120 s
850 Floor curing function C Off | Functional heating | Curing
heating | Functional/curing
heating | Curing/functional
heating | Manually
Off
851 Floor curing setp manually C 0 … 95 °C 25 °C
855 Floor curing setp current E 0 … 95 °C 0 °C
856 Floor curing day current E 0 … 32 0
861 Excess heat draw S Off | Heating mode | Always Always
870 With buffer S No | Yes No
872 With prim contr/system pump S No | Yes No
880 Pump speed reduction S Operating level | Charactéristic Charactéristic
882 Pump speed min S 0 … 100 % 50 %
883 Pump speed max S 0 … 100 % 100 %
888 Curve readj at 50% speed S 0 … 100 % 33 %
889 Filter time const speed ctrl S 0 … 20 min 5 min
890 Flow setp readj speed ctrl S No | Yes Yes
898 Operating level changeover S Frost protection | Reduced |
Comfort
Reduced
900 Optg mode changeover S None | Protection | Reduced |
Comfort | Automatic
Protection
Heating circuit 2
1010 Comfort setpoint E 4 … 35 °C 20 °C
1012 Reduced setpoint E 4 … 35 °C 18 °C
1014 Frost protection setpoint E 4 … 35 °C 10 °C
1016 Comfort setpoint max S 4 … 35 °C 35 °C
1020 Heating curve slope E 0.10 … 4.00 1,5
1021 Heating curve displacement S -4,5 … 4,5 °C 0 °C
1026 Heating curve adaptation S Off | On Off
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ygnis Varmax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ygnis Varmax in the language / languages: English as an attachment in your email.

The manual is 17,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ygnis Varmax

Ygnis Varmax Usermanual and installation guide - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info