638656
34
Zoom out
Zoom in
Previous page
1/48
Next page
LR, LRK, LR-NT, LRK-NT 21 - 32
We reserve the right to make changes to dimensions and construction 32 edition 30.10.2007
6. Installation guide
6.1. Boiler room and boiler room ventilation
The boiler room must be arranged in compliance with local regulations and installation specifications. Particular
attention should be paid to the ventilation of the boiler room.
Supply of combustion air must be guaranteed (non-shut opening).
Minimum air requirement is 1.6 m
3
/h for each kW of boiler power.
Minimum free section of combustion air opening is 6 cm
2
for each kW of boiler power.
Important: The combustion air must not have high dust concentrations.
Furthermore, it must be free of halogens (chlorine and fluorine compounds). An excessive presence of
halogen in the combustion air leads to great corrosion damage. The maximum permitted amount of
halogen in the combustion air is 5 ppm.
Halogen compounds are found in spray cans, thinners, cleaning agents, degreasing agents and
solvents, among others. In addition, halogen emissions are strongly suspected in the vicinity of dry
cleaners', hair dressing salons, swimming pools, printing offices and washing machines installed in the
same room.
In the case of doubt, the perfect quality of the combustion air must be ensured with an external air
intake. Make sure that there is a minimum loss of pressure, since this could impair the performance of
the burner.
6.2. Planning dimensions
6.2.1. Space required
It must be possible to open the furnace door,
including burner, by 90° (door opening can be
either to the left or to the right; right opening
can be changed to left opening at the time of
installing the boiler).
E = Burner length
A = E + d + 150 mm
When a sound proofing hood is used,
dimension D must be checked against the
dimensions of the hood (see chap. 4.4).
6.2.2. Boiler base
If the floor of the boiler room is moist or loose, a sufficiently high boiler base must be provided. Moisture does not
go well with electrical equipment!
A base is also a good idea if the height is not sufficient for installing the burner.
Otherwise, no base is needed for the Pyronox LR series; the Pyronox LRK series requires a base that is at least
100 mm high.
© Copyright YGNIS AG CH-Ruswil
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ygnis Pyronox LRK-NT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ygnis Pyronox LRK-NT in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ygnis Pyronox LRK-NT

Ygnis Pyronox LRK-NT Usermanual and installation guide - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info