813462
7
Zoom out
Zoom in
Previous page
1/28
Next page
7
Note: It is normal for the fan heater to stop running for
periods of time. This happens if the room temperature is
higher than the temperature set on the control.
The heater indicator will be turned off after 10s if the flame
is switched ON. The heater indicator will stay ON if only the
heating function is used.
When in Normal Control Mode switching the appliance
off with the remote will stop both the light and heat
output.
Count Down Timer
This setting is only in normal heating control mode. It allows
the appliance to be returned to Standby after a set period of
time. The heater must be switched on to use this function.
2b.27 Press to cycle through the setting from Off and 0.5 hours
to 9 hours. Timer logo and remaining time will show on the
screen.
The heater of appliance can be automatically run by using
daily timer and weekly timer on the remote.
Battery
The battery power level is indicated at the top right of the
remote control screen, see Diagram 3.
Battery Full No action required
Battery Half Power Ensure new batteries are available.
Battery Empty Replace batteries immediately
Battery replacement is recommended after 1 year. The
Remote requires two 1.5V alkaline AAA batteries.
Changing the batteries will not affect the Timer Mode
settings, however, the clock may need adjusting.
Week Timer Heating
2b.28 The following heating periods have been preset, these can
be altered if desired:
From Monday to Friday
06:00 until 08:30
17:00 until 22:00
From Saturday to Sunday
06:30 until 09:30
11:00 until 13:00
17:00 until 22:00
2b.29 Press until shows at the upper right corner of the
screen to enter the week heating mode.
12
2b.30 Hold the button for 6 seconds to enter the week timer
heating mode setting.
2b.31 Press or ‘’ to move the cursor (a flashing underline).
2b.32 Press the button in the corresponding week position to
select (the character is highlighted) or cancel (the character
is displayed normally) the current setting, the same time
period can be selected together.
13
2b.33 Press the button to move the cursor to the time period
setting area.
2b.34 Press or ‘’ button to choose hour or minute.
2b.35 Press ‘+’ or ‘-’ to set the number.
A maximum of 3 timed heating periods can be set per day.
Minute increment / decrement by 15min per press.
2b.36 Press to set the heating time for the selected day and
return to the week line.
2b.37 Hold the button for 3 seconds or wait for 10 seconds to
save and exit the heating time period setting.
2b.38 Press or ‘’ to check the timer setting for the week
timer heating mode.
2b.39 If the heating needs to be turned off, it will be necessary to
go back to the Normal Control Mode to it turn off.
When in Weekly Timer Mode switching the appliance
off with the remote will stop the light output. The heat
output will continue according to the timer settings.
Adjusting the Set Temperature
2b.40 Press the ‘+’ or ‘-’ button to increase or decrease the
temperature on the basis of COMF temperature.
COMF means the actual temperature is the same as setting.
ECO means the actual temperature is 2℃ lower than the
setting temperature.
ECO- means 4℃ lower.
COMF+ means 2℃ higher.
COMF++ means 4℃ higher.
Adaptive start control
According to room temperature and set-pointed temperature,
the heater will automatically determine the appropriate time to
heat to ensure that it will reach the set-pointed temperature
in the set time (up to 45 minutes prior to the set time).
User Instructions
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeoman Dartmoor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeoman Dartmoor in the language / languages: English as an attachment in your email.

The manual is 4.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info