813336
22
Zoom out
Zoom in
Previous page
1/32
Next page
22
8.3 Supporting the glass, carefully tilt the appliance forward
slightly and lower the top of the glass, see Diagram 15.
15
8.4 Remove the glass from the appliance.
8.5 Carefully place the glass to one side to avoid damage.
8.6 Replace in reverse order.
IMPORTANT: When replacing the glass the side with the
glossy finish must face towards the front of the
appliance.
9. Replacing the Fuel Bed Effect Spindle
WARNING: The Effect Spindles are sharp, please
use caution when servicing this appliance.
9.1 Follow Sections 4, 5, 6, 7 & 8 to access the Fuel Bed Effect
Spindle.
9.2 The Fuel Bed Effect Spindle is attached to the Fuel Bed
Effect Motor and supported by a bracket, see Diagram 16.
Effect Motor
Support Bracket
16
Servicing Instructions
9.3 The Effect Spindle is attached to the Effect Motor by a
rubber sleeve.
Pull the rubber sleeve off the Effect Motor axle,
see Diagram 17.
17
9.4 Withdraw the spindle from the left hand bracket, see
Diagram 18.
The spindle may need to be tilted to be removed from the
location bracket.
18
9.5 Replace in reverse order.
10. Replacing the Fuel Bed LED Boards
10.1 Follow Sections 4, 5, 6, 7, 8 & 9 to access the Fuel Bed
LED Boards.
10.2 The LED boards are located at the bottom of the appliance.
10.3 Release the LED board from the clips and unplug the
connector to remove.
19
Clip Clip
Connector
10.4 Fitting a new board is the reverse of this process.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeoman CL Electric Range at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeoman CL Electric Range in the language / languages: English as an attachment in your email.

The manual is 4.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info