813336

Yeoman CL Electric Range Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
14
1. General
1.1 TOOLS REQUIRED
No tools are required to install this appliance.
1.2 UNPACKING THE FIREPLACE
WARNING! DO NOT use this appliance if any part has
been exposed to water.
Immediately call a qualified service technician to inspect and
to replace any part of the electrical system if necessary.
1.3 Open the packaging carefully and remove the polystyrene.
Remove and discard the plastic bag.
Keep plastic wrapping away from children.
Be responsible when handling the packing materials.
1.4 Check all parts and accessories are removed before
disposing of any packaging.
If necessary keep the original packaging for future transport
and/or storage.
This appliance is heavy and does not require
anchoring to the hearth or floor, but in certain
circumstances the appliance can become
unstable e.g. when leaning on the appliance. If
this is likely, secure the appliance to the hearth
or floor with suitably strong fixings.
2. Locating the Appliance
The appliance may be installed virtually anywhere in your
home. However, when choosing a location ensure that the
general instructions are followed.
2.1 For best results, install out of direct sunlight.
2.2 If the power cord is damaged contact your Yeoman retailer
for a replacement. Only use genuine Yeoman parts on this
appliance.
2.3 The appliance should be located close to a suitable mains
socket to enable connection.
The electrical socket must be easily accessible to allow
disconnection when the appliance is fitted.
2.4 This appliance must stand on a clean, level, firm surface.
Do not stand the appliance on a carpet. Ensure that
furniture, curtains etc. are positioned no closer than 1m and
the appliance stands on a surface that can withstand
temperatures of 90°C for prolonged periods. Do not allow
rugs to be placed within 500mm of the front of the
appliance.
2.5 Ensure that curtains and furniture are not positioned close to
the chosen position, as this would create a potential fire
hazard or block the heater outlet ducts.
WARNING! KEEP ANY COMBUSTIBLE MATERIALS
AT LEAST 1M FROM THE FRONT AND SIDES OF THE
APPLIANCE.
Installation Instructions
ALL INGLENOOK FIREPLACE OPENINGS:
For all models the dimensions required for an inglenook
installation can be calculated by adding 225mm (9") to the
height of the appliance and 150mm (6") to each side. An
additional 50mm (2") must be added to the depth to provide
adequate space behind the appliance.
3. Fitting the Appliance
IMPORTANT: THE OUTER PANELLING IS MADE
FROM CAST IRON. USE CAUTION WHEN
INSTALLING, REMOVING AND STORING AS THE
COMPONENTS ARE HEAVY AND SHOULD BE
HANDLED CAREFULLY.
3.1 Position the stove ensuring all appropriate clearances are
observed.
3.2 Remove the main door casting to gain complete access to
the viewing aperture by lifting the hooks clear of the slots on
the front of the appliance, see Diagram 1.
1
CL5 Midline & CL5 Highline
3.3 From the right hand side pull the lower door open, see
Diagram 2.
2
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yeoman CL Electric Range at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yeoman CL Electric Range in the language / languages: English as an attachment in your email.

The manual is 4.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info