Manual Yeaz SUP Board (page 13 of 56) (English, German, Dutch, French, Italian, Polish, Spanish)

716454

Zoom out

Zoom in

1/56

For initial inflation and to familiarize yourself with your new item, we recommend that you inflate

the board inside at room temperature. The PVC material is soft, which makes installation easier.

If the item has been stored at a temperature below 0°C, allow it to rest at 20°C for 12 hours

before unfolding.

STEP 2: OPERATING THE VALVE

To inflate the board, remove the safety cap from the valve. Turn it counterclockwise to inflate.

Before you start pumping, make sure that the valve pin is in the "upper" position. If the valve pin

is in the "lower" position, press it and turn it clockwise or counterclockwise until it jumps up.

INFLATE

Insert the hose nozzle into the valve of the board and turn the attachment clockwise. After

inflating, remove the hose and close the valve's safety cap to seal it permanently.

CAUTION: If you expose your board to hot temperature or sunlight, please check the air pressure;

if the air pressure exceeds the recommendation, release some air to avoid overstretching the

material.

DEFLATE

Remove water and dirt from the valve and its surroundings before removing the valve safety cap.

Gently press the valve pin to slowly release pressure from the board. After about 10 seconds,

when the air pressure on the board has dropped slightly, push the valve pin down completely

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yeaz SUP Board in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yeaz SUP Board Manual

Product: