Regulatory Notices
Operating Ambient T emperatures
• Operating temperature: +14 to 122°F (-10 to 50°C)
• Relative humidity: 5% to 90%, noncondensing
• Storage temperature: -22 to +158°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in accordance with the operating
instructions and the system environment. We are not liable f or damage or loss resulting from the use of this
product, or for any claim from a third party . We are not liable f or problems with Y ealink device arising from the use
of this product; we are not liab le for nancial damages, lost prots, claims from third parties, etc., arising from the
use of this product.
Explanation of the symbols
• DC symbol
is the DC voltage symbol.
• WEEE Warning symbol
T o av oid the potential effects on the environment and human health as a result of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of
WEEE as unsorted municipal waste and have to collect such WEEE separ ately .
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive . Statements of compliance can be
obtained by contacting support@yealink.com.
Safety Instructions
Save these instructions. Read these safety instructions bef ore use!
General Requirements
• Before you install and use the de vice, read the safety instructions carefully and observe the situation
during operation.
• During the process of storage, transportation, and operation, please always keep the de vice dry and
clean, avoid collision and crash.
• Please attempt not to dismantle the device by yourself . In case of an y discrepancy , please contact the
appointed maintenance center for repair .
• Please refer to the relev ant laws and statutes while using the device. Legal rights of others should be
respected as well.
Environmental Requirements
• Place the device at a well-ventilated place . Do not e xpose the device under direct sunlight.
• Keep the device dry and free of dusts.
• Do not place the device on or near any inammable or re-vulnerable object, such as rubber-made
materials.
• Keep the device a way from any heat source or bare re, such as a candle or an electric heater .
Operating Requirements
• Do not let a child operate the device without guidance.
• Do not let a child play with the device or an y accessory in case of accidental swallowing.
• Please use the accessories provided or authorized by the manufacturer only .
• The power supply of the device shall meet the requirements of the input v oltage of the device. Please use
the provided surge protection power sock et only .
• Before plugging or unplugging any cable , make sure that your hands are completely dry .
• Do not spill liquid of any kind on the product or use the equipment near water , for example, near a
bathtub, washbowl, kitchen sink, w et basement or near a swimming pool.
• During a thunderstorm, stop using the device and disconnect it from the power supply . Unplug the power
plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
• If the device is left unused for a r ather long time, disconnect it from the power supply and unplug the
power plug.
• When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the de vice from
the power supply , and unplug the power plug immediately .
• Contact the specied maintenance center for repair.
• Do not insert any object into equipment slots that is not part of the product or auxiliar y product.
• Before connecting a cable, connect the grounding cable of the device rst. Do not disconnect the grounding cable until
you disconnect all other cables.
Battery Requirements
• Do not immerse the battery into water, which could short-circuit and damage the battery.
• Do not expose the battery to an open ame or leave the battery where it could be subjected to e xtremely
high temperatures, which could cause the battery to explode.
• Do power the handset off before removing the battery .
• Do not try to use the battery for the power supply of any device other than this handset.
• Do not open or mutilate the battery , released electrolyte is corrosive and may cause damage to your e yes
or skin.
• Use only the rechargeable battery pack delivered with the handset or those rechargeable battery packs
expressly recommended by Y ealink.
• Defective or e xhausted battery should never be disposed of as municipal waste. Return old battery to the
battery supplier, a licensed battery dealer or a designated collection facility .
Cleaning Requirements
• Before cleaning the device , disconnect it from the power supply .
• Use a piece of soft, dry and anti-static cloth to clean the device.
• Keep the power plug clean and dry .
T roubleshooting
The unit cannot supply power to Y ealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Y ealink device is connected incorrectly .
1. Connect the cable correctly .
Y ou cannot connect the cable properly .
1. Y ou ma y have connected a wrong Y ealink device.
2. Use the correct power supply .
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference , and (2) this device must accept any interf erence received, including
interference that may cause undesired operation.
Any Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the follo wing two
conditions:
(1) this device may not cause interf erence; and
(2) this device must accept any interf erence, including interference that may cause undesired oper ation of the
device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio ex empts de
licence. L ’e xploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.NMB-3(B)
Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled en vironment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your
body .
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune autre antenne ou
émetteur. Cet équipement devrait être installé et actionné a vec une distance minimum de 20 centimètres entre
le radiateur et votre corps.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,L TD .
309, 3rd Floor, No .16, Y un Ding North Road, Huli District, Xiamen City, Fujian, P .R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V .
Strawinskylaan 3127, Atrium Building, 8th oor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., L TD .
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
About Y ealink
Y ealink (Stock Code: 300628) is a global brand that specializes in video conf erencing, voice comm unications and collaboration solutions with
best-in-class quality , innovative technology and user-friendly experience. As one of the best providers in more than 140 countries and regions,
Y ealink ranks No .1 in the global market share of SIP phone shipments (Global IP Desktop Phone Growth Excellence Leadership A ward
Report, Frost & Sullivan, 2019).
T echnical Support
Visit Y ealink WIKI (http://support.yealink.com/) for rmware downloads, product documents, F A Q, and more. For better service, we sincerely
recommend you to use Y ealink Tick eting system (https://ticket.y ealink.com) to submit all your technical issues.