799303
111
Zoom out
Zoom in
Previous page
1/119
Next page
| Maintaining Your Phone | 111
Procedure
1. Go to OK > Settings > System Settings > Base Restart.
On the CP930W, go to Menu > Settings > Advanced Settings (default PIN: 0000) > Reboot Config >
Base Reboot.
On the DD Phone, go to Menu > Advanced Settings (default PIN: 0000) > Reboot Config > Base
Reboot.
On the CP935W, go to More > Advanced (default PIN: 0000) > Reboot > Base Reboot.
2. Enter the system PIN (default: 0000), and then press Done.
On the CP935W, tap Reboot.
3. Confirm the action.
Results
After the above steps, the registration LED and network status LED on the base station go out simultaneously. After a
period of time, the LED indicators will glow green again when the base station restarts successfully.
Resetting the Base Station
Your system administrator may ask you to reset your phone to factory after you have tried all
troubleshooting suggestions but still do not solve the problem.
Except the handset registrations, the phone will reset all settings to the factory defaults after the resetting.
Check with your system administrator if the personalized settings are kept before resetting your phone to
factory.
Procedure
1. Go to OK > Settings > System Settings > Base Reset.
On the CP930W, go to Menu > Settings > Advanced Settings (default PIN: 0000) > Reboot Config >
Reset Base Settings.
On the DD Phone, go to Menu > Advanced Settings (default PIN: 0000) > Reset Config > Base
Reset.
On the CP935W, go to More > Advanced (default PIN: 0000) > Reset > Base Reset.
2. Enter the system PIN (default: 0000), and then press Done.
On the CP935W, tap Base Reset directly.
3. Select Reset to factory.
A message prompts whether to reset the base.
4. Confirm the action.
Results
All individual settings of the base station will be reset to factory defaults. The power LED indicator and
network LED indicator on the base station slowly flash in sequence during the resetting. LEDs on the base
station glow green after startup.
Important: Base station reset may take a few minutes. Do not power off until the base station
starts up successfully.
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink W70B DECT IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink W70B DECT IP in the language / languages: English as an attachment in your email.

The manual is 5.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info