680111
73
Zoom out
Zoom in
Previous page
1/124
Next page
Phone Settings
61
Auto Intercom
Intercom is a useful feature in an office environment to quickly connect with the operator or the
secretary. You can make internal intercom calls and external intercom calls on the phone.
Internal intercom calls are made between handsets registered to the same base station. External
intercom calls can be made by dialing the feature access code followed by the number. External
intercom calls depend on support from a SIP server.
The handset can automatically answer an incoming external intercom call and play warning tone
only when there is only one handset subscribed and no call in progress on the handset.
To automatically answer an incoming internal intercom call, you need to enable auto intercom
feature on the handset. The following configuration types of auto intercom feature are available
for selection:
On (Beep On): Auto intercom feature is on. The handset will answer an incoming internal
intercom call automatically and play a warning tone.
On (Beep Off): Auto intercom feature is on. The handset will answer an incoming internal
intercom call automatically without a warning tone.
Off: Auto intercom feature is off. You need to answer an incoming internal intercom call
manually.
To configure auto intercom via the handset:
1. Press to enter the main menu.
2. Select Settings->Telephony->Auto Intercom.
The LCD screen displays three configuration types.
3. Press or to highlight the desired configuration type.
4. Press the Change soft key.
The radio box of the selected configuration type is marked.
For more information on placing an internal call, refer to Placing Internal Calls on page 66.
Base Restart
In some instances, you may need to restart the base station to refresh the settings.
To restart the base station via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Base Restart.
3. Enter the system PIN (default: 0000), and then press the Done soft key.
After the above steps, the registration LED and network status LED go out simultaneously. After
a period of time, the LED indicators will illuminate solid green again when the base station
restarts successfully.
Base restart is also configurable via the web user interface at the path: Settings->Upgrade.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink W56P IP Dect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink W56P IP Dect in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yealink W56P IP Dect

Yealink W56P IP Dect Quick start guide - English - 12 pages

Yealink W56P IP Dect Quick start guide - German - 17 pages

Yealink W56P IP Dect Quick start guide - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info