680111
43
Zoom out
Zoom in
Previous page
1/124
Next page
Basic Operations
31
The keypad is unlocked and the icon disappears from the idle screen.
Note
Switching Silent Mode to On/Off
If the silent mode is switched to On, the handset will not ring when receiving an incoming call,
but you can still see the incoming call information on the LCD screen. You can switch the silent
mode to On if you do not want to be disturbed.
To switch the silent mode to On via the handset:
1. Long press until the LCD screen prompts “All Ring Tones Off”.
The silent mode is on. The icon appears on the status bar.
To switch the silent mode to Off via the handset:
1. Long press again until the LCD screen prompts “All Ring Tones On”.
The silent mode is off. The icon disappears from the status bar.
Note
Locating a Handset
You can locate a misplaced registered handset using the base station.
To locate a handset via the handset:
1. Press on the base station.
All the handsets that are registered to this base station will ring (paging) simultaneously
and display the IP address of the base station on the LCD screen.
This helps you locate your handset easily.
You can press any key on one of the handsets or press again on the base station to end
ring (paging).
You can also locate handsets via web user interface at the path
Status->Handset&VoIP->Paging Status.
If the keypad is locked, only the emergency numbers can be dialed out. You must enter the
emergency number continuously and completely. To place emergency calls, you should configure
the emergency numbers in advance. For more information, refer to Emergency Numbers on page
55.
When the silent mode is activated, the advisory tones will not be played, regardless of their
settings.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink W56P IP Dect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink W56P IP Dect in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yealink W56P IP Dect

Yealink W56P IP Dect Quick start guide - English - 12 pages

Yealink W56P IP Dect Quick start guide - German - 17 pages

Yealink W56P IP Dect Quick start guide - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info