680111
38
Zoom out
Zoom in
Previous page
1/124
Next page
User Guide for the W56P IP DECT Phone
26
Basic Network Settings
The base station attempts to contact a DHCP server in your network to obtain valid network
settings (e.g., IP address, subnet mask, gateway address and DNS address) by default. The IP
DECT phone can support either or both IPv4 and IPv6 addresses modes, but IPv6 is disabled by
default.
To configure the IP address mode via handset user interface:
1. Press to enter the main menu.
2. Select Settings->System Settings->Network (default PIN: 0000) ->Basic.
3. Press or to select IPv4, IPv6 or IPv4&IPv6 from the IP Mode field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Configuring Static IP Address
If the base station cannot contact a DHCP server for any reason, you need to configure basic
network settings manually.
You can configure a static IPv4 address for the IP phone. Before configuring it, make sure that
the IP mode is configured as IPv4 or IPv4&IPv6.
To configure static IPv4 IP address manually via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Network (default PIN: 0000) ->Basic.
3. Press to select IPv4, and then press the OK soft key.
4. Press or to select Static from the IP Address Type field.
5. Enter the valid value in the IP Address, Subnet Mask, Default Gateway, Primary DNS and
Secondary DNS field respectively.
6. Press the Save soft key to accept the change.
The base station reboots automatically to make settings effective after a period of time.
You can also configure a static IPv6 address for the IP phone. Before configuring it, make sure
that the IP mode is configured as IPv6 or IPv4&IPv6.
To configure static IPv6 IP address manually via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Network (default PIN: 0000) ->Basic.
3. Press to select IPv6, and then press the OK soft key.
Wrong network settings may result in inaccessibility of your DECT phone and may also have an
impact on your network performance. For more information on these parameters, contact your
system administrator.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink W56P IP Dect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink W56P IP Dect in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yealink W56P IP Dect

Yealink W56P IP Dect Quick start guide - English - 12 pages

Yealink W56P IP Dect Quick start guide - German - 17 pages

Yealink W56P IP Dect Quick start guide - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info