680101
4
Zoom out
Zoom in
Previous page
1/8
Next page
Network Settings
Getting Started
DHCP: By default, the base station attempts to contact a DHCP server in your network to obtain the
valid network settings, e.g., IP address, subnet mask, gateway addres and DNS address.
Static: If the base station cannot contact a DHCP server for any reason, you need to configure the IP
address, subnet mask, gateway address, primary DNS address and secondary DNS address
for the base station manually.
You can configure the base station to obtain network settings in one of the following ways:
3
To configure the network parameters for the base station manually:
1. Press the OK key to enter the main menu, and then select Settings->System Settings -> Network.
3. Select desired type from the IP Address Type field.
2. Enter the system PIN (default: 0000), and then press the Done soft key.
4. Make the desired changes.
Note: The wrong network settings may result in inaccessibility of your phone and may have an impact on
the network Performance. For more information on these parameters, contact your systme administrator.
Shortcuts
The handset in the W52P package is pre-registered to the base station. Internal handset
number and name display on the idle screen after turning the handset on. If your handset
is not pre-registered to the base station, do one of the followings to register it manually:
Handset Registration
This helps you get quick access to features by pressing the shortcut keys directly without having to scroll
through the menu.You can press the following predefined shortcuts to access some frequently used
features of your handset when the handset is idle:
Press to access the call history.
Press to check the line status.
Press to place an internal call.
Press to decrease the ringer volume.
5. Press the Save soft key to accept the change.
Press to access the directory.
Press to increase the ringer volume.
If the handset LCD screen prompts “Searching for Base”, long press on the base station till the
registration LED flashes. Then press the OK key to enter the main menu, and then select Settings->
Registration->Register Handset to register the handset.
If the handset LCD screen prompts “Press base page 2s then press OK”, long press on the
base station till the registration LED flashes. Then press the OK soft key on the handset.
PPPoE: If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode.
Contact the ITSP for the account and password.
Getting Started
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink W52P IP DECT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink W52P IP DECT in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yealink W52P IP DECT

Yealink W52P IP DECT User Manual - English - 98 pages

Yealink W52P IP DECT Quick start guide - German - 8 pages

Yealink W52P IP DECT User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info