799373
8
Zoom out
Zoom in
Previous page
1/18
Next page
| UH38 Headset Connection | 8
1. The headset enters the Bluetooth pairing mode.
When unpacking the UH38 headset for the first time (the UH38 has not been paired with Bluetooth):
Press and hold the Mobile button for 3 seconds to enable the Bluetooth, and the headset enters the
Bluetooth pairing automatically.
The UH38 has been paired with Bluetooth: Press and hold the Mobile button for 5 seconds to
enable the Bluetooth, and the headset enters the Bluetooth pairing automatically.
The voice prompts "Bluetooth on, XX % battery remains, pairing mode" and the headset enters the
Bluetooth pairing mode. The red and blue lights of the Mobile button will flash alternately.
2. Connect the BT51 into your PC port.
3. Open Yealink USB Connect software and select BT51 device card.
4. Click Device settings, you can search and select the Yealink UH38 from the Bluetooth devices list, and
click Start pairing.
The voice prompts "PC connected" which means that the connection is successful.
Note:
Yealink UH38 is the default device name.
• The paired headset and BT51 will be automatically connected the next time when you
power on the headset. You can also disconnect the headset through the Yealink USB
Connect software.
Related information
BT51 LED Indicator
Yealink USB Connect
BT51 LED Indicator
Introduction of the BT51 LED indicator.
Indicator Description
Blue light flashes Bluetooth connecting
Light off Bluetooth connection failed
Connecting to Mobile Device via Bluetooth
You can connect the headset to your phone via the built-in Bluetooth to use as a Bluetooth headset.
1. The headset enters the Bluetooth pairing mode.
Unpacking for the first time (Bluetooth has not been paired): Press and hold the Mobile button for 3
seconds to enable the Bluetooth, and the headset enters the Bluetooth pairing automatically.
Bluetooth has been paired: Press and hold the Mobile button for 5 seconds to enable the Bluetooth,
and the headset enters the Bluetooth pairing automatically.
The voice prompts "Bluetooth on, remaining talk time XX hours, pairing mode", then the headset
enters the Bluetooth pairing mode. The red and blue lights of the Mobile button will flash alternately
(500ms/time) after 2 seconds of the green light of the headset.
2. Enable Bluetooth on your mobile phone/IP phone/PC.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink UH38 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink UH38 in the language / languages: English as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info