799293
7
Zoom out
Zoom in
Previous page
1/12
Next page
5
DECT Repeater RT30 User Guide
Before the cascade registration, you should first register the two repeaters
to the base station. For cascade registration, we recommend that you put
the two cascaded repeaters closer to each other. One repeater attempts
to register to the other repeater (destination repeater). If the destination
repeater de-registers, the repeater does as well. Conversely, it does not.
The repeater supports automatic or manual cascade registration.
Auto Cascade Registration
1. Long press the program key on one repeater for about 3 seconds.
The repeater starts searching for the other repeater, POWER LED turns
orange and DECT LED flashes green.
Wait until POWER LED turns green and DECT LED turns green/orange, auto
cascade registration is successful.
Manual Cascade Registration
1. On one repeater:
a. Confirm the ID: Press the program key. The number of times that RELAY
LED flashes indicates the ID. Press the program key again to return to
the operation mode.
2. On the other repeater:
a. Long press the program key for about 3 seconds.
b. Press the program key as soon as POWER LED turns orange and DECT
LED flashes green, to enter the repeater's ID to be cascaded. Pressing
once indicates that the ID is 1.
POWER LED turns orange and DECT LED turns green.
c. Press the program key for about 3 seconds to confirm the ID.
The repeater starts searching for the repeater to be cascaded, POWER
LED turns green and DECT LED flashes orange.
Wait until POWER LED turns green and DECT LED turns green/orange,
manual cascade registration is successful.
ID Modification
After registering to the base station, every repeater has its own ID, it uses ID
to distinguish with each other. If the IDs of two repeaters conflict, you need
to modify the ID manually.
1. Press the program key to confirm the ID.
2. Long press the program key for about 7 seconds to enter the ID
modification mode.
Both POWER LED and DECT LED turns red.
3. Press the program key to enter the new ID. Pressing once indicates that
the ID is 1.
The number of times that the RELAY LED flashes indicates the entered ID.
4. Long press the program key for about 3 seconds to confirm the ID.
The repeater will re-register.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink RT30 Repeater at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink RT30 Repeater in the language / languages: English as an attachment in your email.

The manual is 0.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info