Manual Yealink DD10K - DECT USB Dongle (page 5 of 52) (English, German, French, Spanish)

799309

Zoom out

Zoom in

1/52

–Press the OK soft key, and then select Register Handset.

–Press , and then select Settings > Registration >

The handset begins searching for the phone.

b.Press the OK soft key after a phone is found.

c. Enter the base station PIN (default: 0000), and then press the

OK soft key to complete the registration.

Note:

• If the handset is registered to the phone successfully, the phone

prompts “Subscribed Succeed”.

• If the handset prompts “Searching for Base”, check whether your

phone is in the handset registration mode or not.

Switching between DD Phone and CC Phone

Modes (for T54W)

1. Assemble the DD10K.

2. Press the Menu soft key when the phone is idle, and then

select Status->Phone Mode.

3. Select the desired mode and click OK.

The phone will reboot to make the change take effect.

Checking the Dongle Status

(for T58V/T58A/T58W/T56A/T53/T53W/T54W/

T57W/VP59)

To check the dongle status for T58V/T58A/T58W/T57W/T56A

/VP59:

1. Insert the DD10K.

2. Swipe left or right to go to the second idle screen.

3. Navigate to Settings->Status->Dongle.

To check the dongle status for T53/T53W/T54W:

1. Insert the DD10K.

2. Press the Menu soft key when the phone is idle, and then

select Status->Dongle Status.

Getting Started (for T41S/T42S/T54W)

DD Phone Mode

Before using a IP phone as a DECT desk phone, you should

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yealink DD10K - DECT USB Dongle in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0.97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yealink DD10K - DECT USB Dongle Manual

Product: