799302
12
Zoom out
Zoom in
Previous page
1/28
Next page
10
Hinweis:
Nach der erfolgreichen Registrierung des CP935W wird auf dem LED-Bildschirm der Basisstation
„Registrierung erfolgreich“ angezeigt.
Wird auf dem LED-Bildschirm des CP935W „Suche Basis“ angezeigt, prüfen Sie bitte, ob die LED-Anzeige für die Regis-
trierung an Ihrer Basisstation blinkt.
Bitte legen Sie über die Web-Benutzeroberäche der Basisstationen ein Konto an, bevor Sie das
CP935W verwenden. Führen Sie folgende Schritte aus:
1. Tippen Sie auf dem LCD-Display des CP935W auf Mehr -> Status -> Basisstatus -> IPv4
und greifen Sie mit einem Browser auf die IP-Adresse zu (der Standard-Benutzername und
das Passwort sind „admin“).
2. Gehen Sie zu Konto -> Registrieren, wählen Sie das Konto, aktivieren Sie „ Aktive Lei-
tung“, geben Sie die Kontoinformationen ein und klicken Sie auf „Bestätigen“.
Bitte kontaktieren Sie den Administrator, falls Sie die Informationen zum Serverkonto benötigen.
Kontoeinstellungen
Hinweis:
Bei der Eingabe der Kontoinformationen ist der Anzeigename, Registrierungsname, Benutzername und Server-Host erforder-
lich.
Registrierung
An einer W70B-Basisstation ist eine Registrierung von bis zu 10 CP935W möglich. Jedes
CP935W kann nur an einer Basisstation registriert werden.
Wenn der LCD-Bildschirm des CP935W „Unregistered!” anzeigt, halten Sie die Taste an
der Basisstation gedrückt, bis die LED-Anzeige blinkt. Ein neues CP935W kann auf zweierlei
Weise registriert werden:
Einfache Registrierung:
1. Drücken Sie auf „Reg“ auf dem CP935W zur schnellen Registrierung.
Normale Registrierung:
1. Tippen Sie auf dem LCD-Display des CP935W auf Mehr -> Allgemeine Einstellungen ->
Anmelden.Das CP935W beginnt mit der Suche nach der Basisstation.
2. Tippen Sie nach der erfolgreichen Suche einer Basisstation auf „OK“ (falls dies nicht die
Basisstation ist, an der Sie sich anmelden möchten, tippen Sie auf „Nächste“ um weiterzu-
suchen).
3. Geben Sie das Passwort der Basisstation ein (Standard: 0000) und tippen Sie dann auf „OK“,
um die Anmeldung abzuschließen.
Stromversorgung an: Drücken Sie die Starttaste für 3 Sekunden oder laden Sie das CP935W.
Stromversorgung aus: Drücken Sie die Starttaste für 10 Sekunden und drücken dann auf dem
LCD-Display des CP935W auf „OK“ oder gehen über Mehr -> Allgemeine Einstellungen ->
Strom aus -> OK.
Stromversorgung des CP935W An / Aus
D
E
U
T
S
C
H
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yealink CP935W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yealink CP935W in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 3.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yealink CP935W

Yealink CP935W User Manual - English - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info