734896
18
Zoom out
Zoom in
Previous page
1/21
Next page
18
Disconnect the machine from the power source before making any repairs.
Symptom Cause Solution
Motor does not run
when “ON” ( I ), fully
connected and trigger
depressed.
On/Off switch is in the “OFF” (O)
position.
Turn switch to the “ON” ( I ) position.
Power cord is not plugged in. Plug in power cord.
Extension cord is too long. Extension
cord is not proper gauge.
Extension cord is damaged.
Replace extension cord with either a 25’
(7.6 m) 14/3 gauge cord or a 50’ (15 m)
14/3 gauge cord.
Electrical outlet does not
supply adequate power.
Try a different outlet.
Tripped pressure washer thermal
protector.
Allow to cool, and restart unit.
Unit does not reach
high pressure.
Diameter of garden hose is too small. Replace with a 1” (25 mm) or 5/8” (16 mm)
garden hose.
Water supply is restricted. Check garden hose for kinks, leaks and
blockage.
Not enough water supply. Open water source fully.
Water inlet lter is clogged. Remove lter and rinse in warm water.
Power nozzle is in low pressure
position.
Replace with desired high pressure tip.
Pump is sucking air. Check that hoses and ttings are airtight.
Turn OFF machine, and purge pump by
squeezing trigger gun until a steady ow of
water emerges through the nozzle.
Output pressure varies
high and low.
Not enough inlet water supply. Turn water on fully. Check garden hose for
kinks, leaks or blockage.
Pump is sucking air. Check that hoses and t- tings are airtight.
Turn OFF machine, and purge pump by
squeezing trigger gun until a steady ow of
water emerges through the nozzle.
Water inlet lter is clogged. Remove lter and rinse with warm water.
Discharge nozzle is obstructed. Blow out or remove debris with a ne
needle.
Calcied gun, hose or power nozzle. Run distilled vinegar through detergent
tank.
Detergent is not
working.
Detergent container is empty. Add more detergent.
Detergent bottle or suction tube not
properly connected.
Check connections.
Detergent is too thick. Dilute detergent.
Filter on detergent suction tube is
clogged.
Run warm water through lter to remove
build-up.
Damaged or clogged detergent suction
tube.
Remove obstruction or replace detergent
suction tube.
Nozzle is in high-pressure position. Use low pressure (black) tip.
Discharge nozzle is obstructed. Blow out or remove debris with a ne
needle.
Garden hose
connection leaks.
Loose ttings. Tighten ttings.
Missing / worn rubber washer. Insert new washer.
Spray wand, extension,
or nozzle leaks.
Spray nozzle not properly attached. Ensure quick-connect wand is attached
securely. Ensure spray tip is clicked in
securely.
Broken o-ring or plastic insert. Call the Toll-Free Hotline.
TROUBLE SHOOTING
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce YF2200LC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce YF2200LC in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info