734891
24
Zoom out
Zoom in
Previous page
1/27
Next page
22
Fault/malfunction Cause Remedy
Pressure washers does not
work
No electrical voltage at the
device
Check the fuse, power cord,
power plug and power source
and have them replaced by
qualified personnel if necessary
On/off switch set to "0" On/off switch set to "I"
Cross section of the extension
cord no large enough and/or the
extension cord is too long
Use extension cord with lager
cross sections and/or use
shorter extension cords
Extension cord damaged Try without extension cord
The protector on the PCB has
activated
Switch off the Pressure washer
and pull the plug out from the
power source, then restart the
Pressure washer
The mains voltage is lower than
that specified
Contact the power supply
company if necessary
The pump is frozen Check and thaw if necessary
Pressure too low, but steady
Wrong spray tips was selected Change to right spray nozzles
Hight-pressure hose are
damaged or leaks in the
connection
Change the hight-pressure
hose or hand-tighten the screw
connection
Leaks in the Pressure washer
Leaks from the pump or internal
connections
Consult customer service
Hose connections loose Hand-tighten the water intake
adapter and the high-pressure
hose screw connection
Irregular operating pressure
Air intake in the water inlet Check the supply hose and
hose connection and replace if
necessary
The water filter is clogged Clean the water filter
Water supply hoses squeezed Straighten out kinked water
supply hoses
Inadequate water supply Check the water supply
The high-pressure washer
operates intermittently
Power cord is damaged Consult customer service
Internal loose electrical
connection
Consult customer service
On/Off switch defective Consult customer service
YF2200BL.indd 22 15-4-30 ��2:28
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce YF2200BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce YF2200BL in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info