734897

Yardforce Y0EWN22WR01 Manual

9
Zoom out
Zoom in
Previous page
1/21
Next page
9
Surface Preparation
Before starting any cleaning project, it is important to inspect the area for objects that could create a haz-
ard. Remove any objects from the work area that could be tripped over, such as toys or outdoor furniture.
Ensure that all doors and windows are closed tightly.
Water Supply (Cold Water Only)
Only draw water through the unit. For use with cold water supply only. Garden hose must be at least a 1/2”
(13 mm) in diameter. Flow rate of water supply must not fall below 2 GPM (gallons per minute). Flow rate
can be determined by running the water for one minute into an empty 5-gallon container. The water supply
temperature must not exceed 104°F (40°C).
CAUTION
• Never use the pressure washer to draw in water contaminated with solvents (e.g. paint thin-
ners, gasoline, oil, etc.).
• Dirt in the water inlet will damage the unit. To avoid this risk, we recommend checking the wa-
ter lter (located inside the water inlet. To clean it out, see Maintenance section).
• Always prevent debris from being drawn into the unit by using a clean water source and an
additional accessory water lter if required.
• To prolong the life of the unit, rest the unit for 5 minutes after every 30 minutes of use.
MACHINE ASSEMBLY
Your Yard Force pressure washer will need to be assembled before operation (tools not required):
1. Install the wheels. (Fig. 2)
The short axle (A) is rst passed through the wheel (W) and then attach to the shaft under the frame of the
machine. Then insert a cotter pin (P) through the hole in the shaft to secure. Repeat that for the second
wheel.
ASSEMBLY AND OPERATION INSTRUCTIONS
Fig. 2
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Y0EWN22WR01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Y0EWN22WR01 in the language / languages: English as an attachment in your email.

The manual is 9,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info