Manual Yardforce SC600 ECO (page 12 of 49) (English, German)

733742

Zoom out

Zoom in

1/49

20 21

Boundary wire crossing a slope should not exceed 10 degrees if downhill or a at area to

the boundary behind the sloop 2 meter.

INSTALLATION GUIDEINSTALLATION GUIDE

min. 2

Slope should not be

steeper than 10°

Boundary wire

Paths, Driveways and Roads

If the lawn boundary is close to a driveway is at a different level as your lawn, you should

avoid your robotic lawn mower to run over it to the other lawn. And you need a safety

distance of 40cm between the boundary wire and the driveway.

> 40 cm

boundary

If the driveway and lawn are at the same level, then you can let the robotic lawn mower run

into the other lawn by passing a corridor created by the boundary wire.

boundary

Uneven lawn surfaces

If the lawn area is very uneven then there is the possibility that blades could touch ground

when your YARD FORCE Robotic Lawnmower cuts. If this is possible ensure either to

remove this issue by leveling or exclude the area totally with boundary wire.

Flowerbeds

If the Lawn working area includes Flowerbeds, that need to be protected with the

boundary wire to be excluded from the working area. If you want the robot to follow the

boundary wire around the protected area, the distance between the two parallel boundary

wires is more than 10cm.

> 10 cm

Another way, if you want the robot to pass over the two parallel boundary wires. The

distance between the two parallel wires should be less than 5 mm. But you need put a

obstacle like a stone or a tube on position A .

Note: Position A must have a location of at area, do not set position at any slope. At the

side of inside boudary wire, there should be an area 1X1m at beside position A.

< 5 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce SC600 ECO in the language / languages: English, German as an attachment in your email.

The manual is 10,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yardforce SC600 ECO Manual

Product: