Manual Yardforce SA600H (page 21 of 33) (English)

733773

Zoom out

Zoom in

1/33

40 41

After connecting the “F” and "B" connectors to the charging station, the charging station

can be xed down with the boundary pegs.

Before xing the charging station, please check again that the above mentioned conditions

are met:

- Even surface within range of power supply

- 2 m straight boundary in front,

- Inclination less than 5 %

- Surplus boundary wire tucked under the charging station for protection, outside the

boundary and laid out in slopes (not rolled-up).

Once the charging station is xed, connect the charger extension cable (14) to charging base.

Now, connect the power supply to the mains outlet. After a brief self-test, one blue LED on the

charging station should light up. If all LEDs stay dark, double-check the mains outlet and the

power supply. If other than a single blue LED lights up, please refer to the chapter on trouble-

shooting.

Turn on and test the installation

Once the blue LED conrms all is OK, test the Robomower's function. Check the LED

regularly to ensure xing the boundary wire has not affected the connection. Then place

the Robomower in the working area, a few metres beside the charging station.

Set the main power switch (11) to "ON". The Robomower will power-up and start a

self-test, but not start working at this time.

Press down on the large STOP button (2) to open the top cover and access the controls.

Activate the button marked " " (situated on the left part of the display) and press

down the top cover to close it.

Once closed, the Robomower will automatically return to the charging station by locating

and following the boundary wire in anti-clockwise direction. If the Robomower fails to dock

correctly, move the charging station to a more suitable position.

Once the device has docked, the

symbol will start ashing. This indicates that the

battery is charging correctly.

After initial installation, the Robomower will remain in the charging station until the battery is

fully charged.

Successful docking and charging indicates that you have found a suitable position for the

charging station. It is now time to x it in position by fully driving the pegs into the ground.

Take care not to damage or kink the surplus wire stored under the charging station.

Start

Home

Set

1 m at lawn

Area to be cut

2 m

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS

LED

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce SA600H in the language / languages: English as an attachment in your email.

The manual is 7,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yardforce SA600H

Yardforce SA600H User Manual - German - 35 pages

Yardforce SA600H User Manual - French - 34 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yardforce SA600H Manual

Product: