779831

Yardforce Compact 300RBS Manual

7
Zoom out
Zoom in
Previous page
1/46
Next page
10 11
GB GB
• Connect the machine to a power socket with a residual-
current circuit breaker that has a rated current of no more
than 30 mA.
• Always keep the extension cable well away from the
cutting tools. Should the power cable become damaged
during work, instantly disconnect the power cable
from the mains. DO NOT TOUCH THE POWER CABLE
BEFORE IT HAS BEEN DISCONNECTED FROM THE
MAINS! Risk of electric shock.
• The supply cord cannot be replaced. If the cord is
damaged the appliance should be scrapped.
• Keep extension cable away from blades and other
moving parts. They may damage the cable and result in
contact with live parts.
• Check that the mains voltage is the same as indicated on
the rating plate.
MAINTENANCE AND STORAGE
• Keep all nuts, bolts and screws tight to be sure the
machine is in a safe working condition.
• Replace worn or damaged parts for safety.
• Ensure that only the recommended replacement cutting
blades are fitted.
• Ensure that batteries are charged using the charger
supplied or recommended by the manufacturer. Incorrect
use may result in electric shock, overheating or leakage
of corrosive liquid from the battery.
• Servicing of the machine should be carried out according
to manufacturer's instructions.
• In the event of leakage of electrolyte, flush with water/
neutralising agent, seek medical help if it comes into
contact with the eyes.
• Store the appliance with battery pack fully charged at
room temperature (around 20 °C).
• Every deep discharge cycle decreases the capacity of
battery pack. To prolong battery life, it is recommended
to charge the battery every 6 months over extended
periods of time without use.
TRANSPORT
The original packaging should be used when transporting
the Robotic Mower over long distances.
To safely move from or within the working areas:
• Press the STOP button to stop the mower.
• Move the main switch button to the OFF position if you
intended to carry the mower.
• Carry the Robotic Mower using the handle below at the
rear. Carry the mower with the blade disc away from the
body.
PRODUCT SAFETY WARNINGS
Not to touch moving hazardous parts before these have
come to a complete stop.
Do not store anything heavy on the top of the Robotic
Mower or docking station both during storage or when in
use.
Never use the device if the main power switch is damaged
or does not work properly. Never modify the main power
switch. Set the main power switch to OFF for storage or
when the device is not in use. Use the original packaging
when transporting the Robotic Mower, especially for long
distances.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Compact 300RBS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Compact 300RBS in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info