733745

Yardforce Amiro 400 Manual

5
Zoom out
Zoom in
Previous page
1/46
Next page
6 7
GB GB
GENERAL SAFETY WARNINGS
WARNING!
This machine can cause serious injuries. Follow
instructions below to reduce risk of accident and
injury.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
PREPARATION
• Read the instructions carefully and make sure you
understand them fully. Be familiar with the controls and
the proper use of the machine.
• Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions
use the machine.
• Local regulations may restrict the age of the operator.
Children should be supervised to ensure that they do not
play with the appliance.
• The operator or user is responsible for accidents or
hazards occurring to other people or their property.
• Ensure the correct installation of the perimeter boundary
system as instructed.
• Periodically inspect the area where the machine is to
be used and remove all stones, sticks, wires, and other
debris which could cause damage to the machine or be
unsafe.
• Periodically visually inspect to see that the blades, blade
bolts and cutter assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to
preserve balance.
• On multi-spindle machines, take care as rotating one
blade can cause other blades to rotate.
• Never leave the machine to operate unattended,
especially while other people such as children and pets
are in the area.
• Never use the machine to level out uneven patches.
• If the blades no longer cut correctly or if the motor is
overloaded, check all the parts of your equipment and
replace the worn parts. If a more extensive repair is
required, contact the customer service centre.
USE
• Do not put hands or feet near or under rotating parts.
• Never pick up or carry the machine while the motor is
running.
• Remove the plug from the mains or remove the disabling
device:
– before clearing any blockages.
– before checking, cleaning or maintaining the machine.
– after striking a foreign object to inspect the machine for
damage.
– if the machine starts to vibrate abnormally, and to
check for damage before restarting.
• Start Robotic Mower according to the instructions. When
the main power switch is in the ON position, make sure
you keep your hands and feet away from the rotating
blades.
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

yardforce-amiro-400

Reset search

  • Bonjour. J'ai besoin du plan électrique de la tondeuse yardforce amiro 400 (cablage intérieur de la machine)
    Merci. Submitted on 6-3-2022 at 11:13

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yardforce Amiro 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yardforce Amiro 400 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info