514485
220
Zoom out
Zoom in
Previous page
1/228
Next page
7-36
ELECTRICAL COMPONENTS
ELECTRICAL
COMPONENTS
CHECKING THE COOLANT
TEMPERATURE SENSOR
1. Remove:
•Coolant temperature sensor
Refer to "REMOVING THE CYL-
INDER HEAD" section in the
CHAPTER 4.
Handle the coolant temperature
sensor with special care.
Never subject the coolant tem-
perature sensor to strong
shocks. If the coolant tempera-
ture sensor is dropped, replace
it.
2. Check:
Coolant temperature sensor re-
sistance
3. Connect:
•Tester
Tester (+) lead Brown lead "1"
Tester (-) lead Black/Blue lead
"2"
4. Immerse the coolant temperature
sensor in a container filled with
coolant.
Make sure the coolant temperature
sensor terminals do not get wet.
5. Place a thermometer "3" in the
coolant.
6. Slowly heat the coolant, and then
let it cool to the specified temper-
ature indicated in the table.
Out of specification Replace.
CHECKING THE INTAKE AIR
PRESSURE SENSOR
1. Check:
Intake air pressure sensor output
voltage
2. Connect:
Test harness S–pressure sensor
(3P) "1"
•Tester
Tester (+) lead Pink/White lead
(wire harness color)
Tester (-) lead Black/Blue lead
(wire harness color)
3. Connect the FI diagnostic tool
sub-wire harness to a battery, and
then set the switch on the harness
to "ON".
When checking the intake air pres-
sure sensor, do not start the en-
gine.
4. Measure the intake air pressure
sensor output voltage.
Out of specification Replace
CHECKING THE INTAKE AIR
TEMPERATURE SENSOR
1. Remove:
Intake air temperature sensor
(from the air filter case.)
Handle the intake air temperature
sensor with special care.
Never subject the intake air tem-
perature sensor to strong
shocks. If the intake air tempera-
ture sensor is dropped, replace
it.
2. Check:
Intake air temperature sensor re-
sistance
3. Connect:
•Tester
Tester (+) lead Brown/White
lead "1"
Tester (-) leadBlack/Blue lead
(wire harness color) "2"
Out of specification Replace.
CHECKING THE ATMOSPHERIC
PRESSURE SENSOR
1. Check:
Atmospheric pressure sensor out-
put voltage
2. Connect:
Test harness S- pressure sensor
(3P) "1"
•Tester
Tester (+) lead Pink lead (wire
harness color)
Tester (-) lead Black/Blue lead
(wire harness color)
B/L
Br
Coolant
tempera-
ture sensor
resistance
Tester se-
lector posi-
tion
210–220 Ω
(100°C,
212°F)
Ω×100
2.51–2.78
kΩ (20°C,
68°F)
kΩ×1
Test harness S–pressure
sensor (3P)
YU-03207/90890-03207
Output volt-
age
Tester se-
lector posi-
tion
3.4–3.8 V DCV
Intake air
tempera-
ture sensor
resistance
Tester se-
lector posi-
tion
5.4–6.6 kΩ
(0°C, 32°F)
kΩ×1
290–390 Ω
(80°C,
176°F)
Ω×100
Br/WB/L
220


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YZ450F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YZ450F in the language / languages: English as an attachment in your email.

The manual is 11,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YZ450F

Yamaha YZ450F User Manual - German - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info