514484
134
Zoom out
Zoom in
Previous page
1/633
Next page
2 - 22
SPEC
CABLE ROUTING DIAGRAM
È
Fasten the TPS lead (in the
sub wire harness) under the
frame so that it does not con-
tact the carburetor.
Ô
Make sure that the TPS lead
coupler does not go outside the
chassis.
Fasten the TPS lead under the
coupler to the frame with a
plastic locking tie.
Ò
Pass the carburetor breather
hose and overflow hose
between the connecting rod
and cross tube (frame).
˜ Fasten the neutral switch lead
and oil hose together with a
plastic locking tie and cut off
the tie end.
ˆ Fasten the cylinder head
breather hose with the hose
holder.
Ø Fasten the neutral switch lead
to the frame with a plastic band
ends toward the rear of the
frame.
Fasten the cylinder head
breather hose with the hose
holder.
ΠPass the clutch cable through
the cable guide.
 Fasten the neutral switch lead
and CDI magneto lead together
with a plastic band.
Í Pass the clutch cable on the
inside the cylinder head
breather hose.
Ê Pass the cylinder head
breather hose along the inner
side of the radiator pipe.
Ë Pass the radiator breather
hose from the right side of the
frame to the left side, over radi-
ator pipe 1, along the inner side
of radiator hose 4 and the radi-
ator, and between the lower
engine bracket, crankcase, oil
hose and the frame.
Pass the clutch cable between
the frame and radiator and
over the lower boss on the radi-
ator.
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YZ426F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YZ426F in the language / languages: English, German, French as an attachment in your email.

The manual is 39,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info