514484
73
Zoom out
Zoom in
Previous page
1/633
Next page
GEN
INFO
NETTOYAGE ET RANGEMENT
REINIGUNG UND STILLEGUNG
8. Lack- und Chromflächen können mit Auto-
wachs poliert werden. Kombinierte Reini-
ger und Polituren sind zu vermeiden, da sie
oft Scheuermittel enthalten, die den Lack
auf Tank und Verkleidungsteilen beschädi-
gen würden.
9. Nach der Wäsche den Motor anlassen
und warmlaufen lassen.
STILLEGUNG
Vor einer mehr als zweimonatigen Stillegung
sollten einige Schutzvorkehrungen getroffen
werden, um Schäden zu verhindern. Das
Fahrzeug zuerst gründlich reinigen und dann
folgendermaßen zur Stillegung vorbereiten:
1. Kraftstofftank, Kraftstoffleitungen und
Vergaser-Schwimmerkammer entleeren.
2. Die Zündkerze herausschrauben, unge-
fähr einen Teelöffel Motoröl in die Ker-
zenbohrung geben und die Zündkerze
wieder hineinschrauben. Bei gedrücktem
Motorstoppschalter den Kickstarter mehr-
mals durchtreten, um das Öl in der Zylin-
derlaufbuchse zu verteilen.
3. Die Antriebskette lösen, gründlich reini-
gen und dann schmieren. Die Kette wie-
der montieren oder in einem am Rahmen
befestigten Plastikbeutel aufbewahren.
4. Alle Seilzüge ölen.
5. Das Fahrzeug ganz aufbocken, um beide
Räder vom Boden abzuheben.
6. Eine Plastiktüte über die Schalldämpfer-
öffnung stülpen, um Eindringen von
Feuchtigkeit zu verhindern.
7. Bei Lagerung in extrem feuchter oder
salzhaltiger Luft auf alle Metalloberflä-
chen einen dünnen Ölfilm auftragen. Je-
doch niemals Gummiteile oder den Sitz-
bankbezug einölen.
HINWEIS:
Anfallende Reparaturen vor der Stillegung
ausführen.
8. Un encaustique pour automobile peut être
appliqué sur toutes les surfaces peintes et
chromées. Eviter les liquides de nettoyage à
encaustique, car ils contiennent de labrasif.
9. Les opérations ci-dessus terminées, lancer le
moteur et le laisser tourner pendant quelques
minutes.
RANGEMENT
Si lon remise la machine pour 60 jours ou plus, il
faut prendre des mesures de conservation pour évi-
ter sa détérioration. Après un nettoyage soigné, pré-
parer la machine de la manière suivante:
1. Vider le réservoir, les conduites dessence et
la cuve du carburateur.
2. Déposer la bougie, verser une cuillère à soupe
dhuile moteur SAE 10W-30 dans le trou de
bougie, et la remettre en place. Coupe-circuit
à la position arrêt, donner plusieurs coups de
pédale pour enduire le cylindre dhuile.
3. Déposer la chaîne, la nettoyer soigneusement
au dissolvant et lubrifier. Remonter la chaîne
ou la ranger dans un sachet plastique fermé
fixé au cadre.
4. Lubrifier tous les câbles de commande.
5. Mettre le cadre sur plots pour soulever les
roues du sol.
6. Fixer un sachet plastique sur la sortie du pot
d’échappement pour éviter lintroduction
dhumidité.
7. Si la machine est placée dans une atmosphère
humide ou marine, enduire toutes les surfaces
métalliques nues dune fine couche dhuile.
Ne pas appliquer dhuile sur les parties en
caoutchouc ou sur la selle.
N.B.:
Avant de ranger la machine, effectuer toutes les
réparations en souffrance.
1 - 21
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YZ426F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YZ426F in the language / languages: English, German, French as an attachment in your email.

The manual is 39,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info