Manual Yamaha YZ250LC (page 578 of 596) (English, German, French, Italian)

514483

578

Zoom out

Zoom in

1/596

7-17

SETTING

TUN

2. Remove the stand or block from the engine

and with a rider astride the seat, measure

the sunken length b between the rear wheel

axle center and the rear fender holding bolt.

3. Loosen the locknut 1 and make adjustment

by turning the spring adjuster 2 to achieve

the standard figure from the subtraction of

the length b from the length a.

Standard figure:

90~100 mm (3.5~3.9 in)

NOTE:

If the machine is new and after it is broken in,

the same set length of the spring may change

because of the initial fatigue, etc. of the spring.

Therefore, be sure to make re-evaluation.

If the standard figure cannot be achieved by

adjusting the spring adjuster and changing the

spring set length, replace the spring with an

optional one and make re-adjustment.

1P8-9-32-7 4/28/06 3:48 PM Page 38

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YZ250LC in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 15,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yamaha YZ250LC Manual

Product: