514481
143
Zoom out
Zoom in
Previous page
1/168
Next page
5-35
SWINGARM
HANDLING NOTE
Support the machine securely so
there is no danger of it falling over.
REMOVING THE CAP
1. Remove:
Left cap "1"
Remove with a slotted-head screw-
driver inserted under the mark "a" on
the left cap.
REMOVING THE BEARING
1. Remove:
Bearing "1"
Remove the bearing by pressing its
outer race.
CHECKING THE SWINGARM
1. Inspect:
Bearing "1"
Bushing "2"
Free play exists/unsmooth revolu-
tion/rust Replace bearing and
bushing as a set.
2. Inspect:
Oil seal "3"
Damage Replace.
CHECKING THE RELAY ARM
1. Inspect:
Bearing "1"
•Collar "2"
Free play exists/unsmooth revolu-
tion/rust Replace bearing and
collar as a set.
2. Inspect:
Oil seal "3"
Damage Replace.
CHECKING THE CONNECTING
ROD
1. Inspect:
•Bearing "1"
Collar "2"
Free play exists/unsmooth revolu-
tion/rust Replace bearing and
collar as a set.
2. Inspect:
Oil seal "3"
Damage Replace.
INSTALLING THE BEARING AND
OIL SEAL
1. Install:
•Bearing "1"
Oil seal "2"
To swingarm.
Apply the molybdenum disulfide
grease on the bearing when install-
ing.
Install the bearing by pressing it on
the side having the manufacture's
marks or numbers.
First install the outer and then the
inner bearings to a specified depth
from inside.
2. Install:
Bearing "1"
Washer "2"
Oil seal "3"
To relay arm.
Apply the molybdenum disulfide
grease on the bearing when install-
ing.
Install the bearing by pressing it on
the side having the manufacture's
marks or numbers.
Apply the molybdenum disulfide
grease on the washer.
3. Install:
Bearing "1"
Oil seal "2"
To connecting rod.
Apply the molybdenum disulfide
grease on the bearing when install-
ing.
Install the bearing by pressing it on
the side having the manufacture's
marks or numbers.
Installed depth of bear-
ing:
Outer "a": 0 mm (0 in)
Inner "b": 6.5 mm (0.26
in)
Installed depth of bear-
ing "a":
0 mm (0 in)
Installed depth of bear-
ing "a":
0 mm (0 in)
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YZ125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YZ125 in the language / languages: English as an attachment in your email.

The manual is 8,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YZ125

Yamaha YZ125 User Manual - German - 172 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info