514481
33
Zoom out
Zoom in
Previous page
1/168
Next page
2-9
TIGHTENING TORQUES
CHASSIS
- marked portion shall be checked for torque tightening after break-in or before each race.
Item
Thread
size
Q'ty Tightening torque Remarks
Upper bracket and outer tube M8 4 21 Nm (2.1 m•kg, 15 ft•lb)
Lower bracket and outer tube M8 4 21 Nm (2.1 m•kg, 15 ft•lb)
Upper bracket and steering stem M24 1 145 Nm (14.5 m•kg, 105 ft•lb)
Handlebar upper holder M8 4 28 Nm (2.8 m•kg, 20 ft•lb)
Handlebar lower holder M12 2 40 Nm (4.0 m•kg, 29 ft•lb)
Steering ring nut M28 1 Refer to TIP.
Front fork and damper assembly M51 2 30 Nm (3.0 m•kg, 22 ft•lb)
Front fork and adjuster M22 2 55 Nm (5.5 m•kg, 40 ft•lb)
Copper
washer
Damper assembly and base valve M42 2 29 Nm (2.9 m•kg, 21 ft•lb)
Adjuster and damper assembly M12 2 29 Nm (2.9 m•kg, 21 ft•lb)
Bleed screw (front fork) and base valve M5 2 1 Nm (0.1 m•kg, 0.7 ft•lb)
Front fork and front fork protector M6 6 5 Nm (0.5 m•kg, 3.6 ft•lb)
Cable guide (front brake hose) and lower
bracket
M6 1 4 Nm (0.4 m•kg, 2.9 ft•lb)
Front fork protector and brake hose hold-
er
M6 2 8 Nm (0.8 m•kg, 5.8 ft•lb)
Throttle cable cap M4 2 0.5 Nm (0.05 m•kg, 0.36 ft•lb)
Front brake master cylinder and bracket M6 2 9 Nm (0.9 m•kg, 6.5 ft•lb)
Brake lever mounting bolt M6 1 6 Nm (0.6 m•kg, 4.3 ft•lb)
Brake lever mounting nut M6 1 6 Nm (0.6 m•kg, 4.3 ft•lb)
Brake lever position locknut M6 1 5 Nm (0.5 m•kg, 3.6 ft•lb)
Clutch lever mounting nut M6 1 4 Nm (0.4 m•kg, 2.9 ft•lb)
Clutch lever holder M5 2 4 Nm (0.4 m•kg, 2.9 ft•lb)
Front brake master cylinder cap M4 2 2 Nm (0.2 m•kg, 1.4 ft•lb)
Front brake hose union bolt (brake master
cylinder)
M10 1 30 Nm (3.0 m•kg, 22 ft•lb)
Copper
washer
Front brake hose union bolt (caliper) M10 1 30 Nm (3.0 m•kg, 22 ft•lb)
Copper
washer
Front brake caliper and front fork M8 2 28 Nm (2.8 m•kg, 20 ft•lb)
Grip cap upper and lower M6 2 4 Nm (0.4 m•kg, 2.9 ft•lb)
Engine stop switch screw M3 1 0.5 Nm (0.05 m•kg, 0.36 ft•lb)
Brake caliper (front and rear) and pad pin
plug
M10 2 3 Nm (0.3 m•kg, 2.2 ft•lb)
Brake caliper (front and rear) and pad pin M10 2 18 Nm (1.8 m•kg, 13 ft•lb)
Brake caliper (front and rear) and bleed
screw
M8 2 6 Nm (0.6 m•kg, 4.3 ft•lb)
Front wheel axle and axle nut M16 1 105 Nm (10.5 m•kg, 75 ft•lb)
Front wheel axle holder M8 4 21 Nm (2.1 m•kg, 15 ft•lb)
Front brake disc and wheel hub M6 6 12 Nm (1.2 m•kg, 8.7 ft•lb)
Rear brake disc and wheel hub M6 6 14 Nm (1.4 m•kg, 10 ft•lb)
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YZ125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YZ125 in the language / languages: English as an attachment in your email.

The manual is 8,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YZ125

Yamaha YZ125 User Manual - German - 172 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info