This quick reference guide explains steps to connect a TV and a DVD player/recorder to this unit and achieve
the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual.
Decide where to install this unit.
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound efects may not be
achieved. You may install this unit in parallel with the wall or in the corner.
Install this unit using a rack, etc.
Depending on your installation environment, connections with external components (see “2 Connecting external components to this unit”) can be done before
installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first.
For further information on installation, see page 13 in the Owner’s Manual.
Installing this unit
1
Connecting external components such as a TV or DVD player/recorder to this unit.
Connect your TV or DVD player/recorder to this unit using appropriate cables as shown below.
For further information on connecting other components, see pages 16 to 26 in the Owner’s Manual.
Connecting external components to this unit
2
Install this unit in the exact center of the wall when it is
measured from the left and right corners.
The following is an example of installing this unit in a rack.
1 Place this unit in front of
the rack.
2 Connect this unit to your
TV and DVD player/recorder.
3 Install this unit in the
rack.
4
Installation is completed.
Install this unit in the corner at a 40º to 50º angle from the
adjacent walls.
40º to 50º
An object, such as furnitureAn object, such as furniture
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
y Hint
Note
To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
Be careful not to leave scratches on this unit or the rack.
This connection example shows a way to connect external components such as a TV or DVD
player/recorder to this unit by using the supplied cable. You can enjoy the multi-channel audio from the
DVD player/recorder and the analog/digital audio from the TV. Use the video pin cable supplied with your
DVD player/recorder to make a video connection between your DVD player/recorder and TV.
Connection
example 1
1HDMI cable (sold separately)
(Displays the DVD digital video on the TV)
2OSD video pin cable (supplied)
(Displays the YSP-600 menu screen on the TV)
3 Optical cable (supplied)
(Inputs the TV digital audio sounds to this unit)
4HDMI cable (sold separately)
(Inputs the DVD digital audio/video signals to this unit)
Connect cables in the following order.
Supplied
1 Audio pin cable
(Inputs the TV analog audio sounds to this unit)
2OSD video pin cable
(Displays the YSP-600 menu screen on the TV)
3 Optical cable
(Inputs the TV digital audio sounds to this unit)
4Digital audio pin cable
(Inputs the DVD digital audio sounds to this unit)
Connect cables in the following order.
Continued
on the back
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
Note
Check whether the digital audio output of your TV and DVD
player/recorder is turned on.
y Hint
If you connect this unit to an HDMI control-compatible TV (except
some models) via HDMI, you can use the remote control supplied
with your TV to turn on or off the power, select the audio output
component, and adjust the volume level of this unit.
Note
Check whether the digital audio output of your TV and DVD
player/recorder is turned on.
This connection example shows a way to make the most of the capability of this unit. You can enjoy
DVD audio and video with higher quality via the HDMI cable. In case your TV does not have a built-in
digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite tuner, cable TV
tuner, or digital airwave tuner via the HDMI cable. For details, see “Connections using HDMI cables” on
page 18 and “Using the HDMI control feature” on page 57 in the Owner’s Manual.
Connection
example 2
Continued
on the back
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
1
(Sold separately)
DVD player/recorder
DVD player/recorder
TV
4(Sold separately)23
1234
TV
To the AC wall outlet
YSP-600
Audio connection
System connection
Video connection
Do not plug the power supply cable
into an AC wall outlet until all
connections are complete.
If a subwoofer is connected to this unit, turn on the power of your subwoofer and then carry
out the AUTO SETUP procedure (see the backside) or select “SWFR” for “BASS OUT” in
“SUBWOOFER SET” via MANUAL SETUP (see page 64 in the Owner’s Manual).
1. Pull out the cap.
2. Check the direction.
Optical cable
Pull out the cap
before connecting
the optical cable,
and then check
the direction to
insert the cable.
1. Pull out the cap.
2. Check the direction.
Optical cable
Pull out the cap
before connecting
the optical cable,
and then check
the direction to
insert the cable.
Subwoofer
To the AC wall outlet
YSP-600
Audio connection
System connection
Do not plug the power supply cable
into an AC wall outlet until all
connections are complete.
If a subwoofer is connected to this unit, turn on the power of your subwoofer and then carry
out the AUTO SETUP procedure (see the backside) or select “SWFR” for “BASS OUT” in
“SUBWOOFER SET” via MANUAL SETUP (see page 64 in the Owner’s Manual).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Yamaha YSP-600 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Yamaha YSP-600 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.
The manual is 10,53 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.