419747
41
Zoom out
Zoom in
Previous page
1/54
Next page
41 En
PREPARATIONINTRODUCTION APPENDIXPLAYBACK FEATURES SETTINGS
FM tuner
Remote control
Digital audio signals cannot be
played back. (q DIGITAL indicator
does not light up in the front panel
display.)
The playback component is connected to this unit
with an analog connection.
Connect them with an HDMI connection or a digital
connection.
12
The external component is not set to output digital
audio signals.
Refer to the owner’s manual supplied with your
component and check the setting.
Bit streaming is disabled on the external component. Refer to the owner’s manual supplied with your
component and check the setting.
There is noise interference when a
subwoofer is not connected to this
unit.
The protection circuitry was in operation because a
source with strong bass elements was played back.
Turn down the volume level.
21
Set “BASS OUT” to “SUBWOOFER” in
“SUBWOOFER SET”.
33
Connect a subwoofer and adjust settings for
“SUBWOOFER SET”.
33
On-screen display does not
appear.
The cable is not connected to the TV or this unit
properly.
Connect the cable properly.
12
The HDMI control function does
not work properly.
“HDMI CONTROL” is set to “OFF” in “SET
MENU”.
Set “HDMI CONTROL” to “ON” in “SET MENU”.
36
The HDMI control function is disabled on your TV. Refer to the owner’s manual supplied with your TV
and check the setting.
The number of the connected HDMI components is
over the limit.
Disconnect some of the HDMI components.
The automatic lipsync is not
effective even “AUTO LIP SYNC” is
set to “ON”.
The TV does not support the automatic lipsync. Set “AUTO LIP SYNC” to “OFF” and then manually
adjust the audio output delay.
33
“Not Available” appears on the
front panel display after key
operation.
The key is unable to function in the current condition.
Problem Cause Remedy
See
page
FM stereo reception is noisy. The characteristics of FM stereo broadcasts may
cause this problem when the transmitter is too far
away or the antenna input is poor.
Check the antenna connections.
14
Try using a high-quality directional FM antenna.
Use the manual tuning method.
25
There is distortion, and clear
reception cannot be obtained even
with a good FM antenna.
There is multi-path interference. Adjust the antenna position to eliminate multi-path
interference.
The desired station cannot be
tuned into with the automatic
tuning method.
The signal is too weak. Use a high-quality directional FM antenna.
Use the manual tuning method.
25
Previously preset stations can no
longer be tuned into.
This unit has been disconnected for a long period. Preset the stations again.
25
Problem Cause Remedy
See
page
The remote control does not work
and/or function properly.
Wrong distance or angle. The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees off-
axis from the front panel.
14
Direct sunlight or lighting (from an inverter type of
fluorescent lamp, etc.) is striking the remote control
sensor of this unit.
Reposition this unit.
The batteries are weak. Replace all batteries.
14
Problem Cause Remedy
See
page
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha ysp 4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha ysp 4100 in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha ysp 4100

Yamaha ysp 4100 User Manual - German - 54 pages

Yamaha ysp 4100 User Manual - Dutch - 54 pages

Yamaha ysp 4100 User Manual - French - 54 pages

Yamaha ysp 4100 User Manual - Italian - 54 pages

Yamaha ysp 4100 User Manual - Swedish - 54 pages

Yamaha ysp 4100 User Manual - Spanish - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info