516956
31
Zoom out
Zoom in
Previous page
1/82
Next page
Initial settings
31 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
When the connected components and jacks are changed, reset this
unit with the following procedure.
Setting the HDMI control function
1
Turn on all components connected to this
unit via HDMI cable.
2
Enable the HDMI control function of all
components connected to this unit via
HDMI cable.
For this unit, set “HDMI CONTROL” to “ON” (p. 65).
2)
For external components, refer to the manual supplied
with each component.
3)
3
Turn off the TV and then turn on it again.
Registering HDMI compatible
components to the TV
4)
1
Select this unit as the input source of the
TV.
2
Turn on an external components, such as
a Blu-ray disc player, connected to this
unit via HDMI cable.
3
Select the input source of this unit to
Blu-ray disc player and check whether the
image in the player is correctly displayed
or not.
If the Blu-ray disc player is connected via HDMI IN1
jack, press the HDMI1 key.
4
Check if the HDMI control function works
(turn on this unit or adjust the volume level
using the remote control of the TV).
HDMI1
Input source name
If the HDMI control function is not working
Be sure that all components are correctly connected to this
unit, and that settings are properly configured as described
below.
The TV is connected to the HDMI OUT (ARC) jack of this
unit.
“HDMI CONTROL” (p. 65) is set to “ON” in the setup
menu.
The HDMI control function is enabled on the TV. (Also
check the relative settings such as power interlock function
or speaker priority.)
When the HDMI control function is not still working even
after the above has been checked,
Turn off this unit and the TV, and then turn them back on
again.
Disconnect the AC power supply cable of the unit and
external components connected to the unit via HDMI cable.
Plug them in again after about 30 seconds.
After OPTICAL, ANALOG, AUX, YIT, or USB
5)
input
has been enabled, switch the input source for the TV and
this unit to the components connected via HDMI cable.
Changing the connection method and
connected components
1
Disable the HDMI control function of the
TV and Blu-ray disc player, turn off all
connected components, and change the
connections.
2
Perform steps 1 to 3 of “Setting the HDMI
control function”.
The default setting is “OFF”.
When “HDMI CONTROL” is set to “ON”
When the Eco function (p. 41) is enabled, this unit enters standby
mode if the TV is selected for audio output using the TV’s remote
control.
The example of TV settings
From the setup menu on your TV, select “Link setting” “HDMI
control setting”, then set a setting such as “HDMI control function” to
“ON”.
Setting such as “Speaker priority” should be set to “AV amplifier”.
For some HDMI compatible components, registering HDMI compatible
components to TV is not required in this case when the HDMI control
function is enabled.
YSP-4300 only
2) y
3) y
4) y
5) y
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YSP-3300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YSP-3300 in the language / languages: English as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YSP-3300

Yamaha YSP-3300 Additional guide - English - 2 pages

Yamaha YSP-3300 Quick start guide - English - 2 pages

Yamaha YSP-3300 User Manual - English - 35 pages

Yamaha YSP-3300 Additional guide - German - 2 pages

Yamaha YSP-3300 User Manual - German - 82 pages

Yamaha YSP-3300 User Manual - German - 35 pages

Yamaha YSP-3300 Additional guide - Dutch - 2 pages

Yamaha YSP-3300 User Manual - Dutch - 35 pages

Yamaha YSP-3300 User Manual - Dutch - 82 pages

Yamaha YSP-3300 User Manual - French - 82 pages

Yamaha YSP-3300 Additional guide - French - 2 pages

Yamaha YSP-3300 User Manual - French - 35 pages

Yamaha YSP-3300 User Manual - Italian - 82 pages

Yamaha YSP-3300 Additional guide - Italian - 2 pages

Yamaha YSP-3300 User Manual - Italian - 35 pages

Yamaha YSP-3300 User Manual - Swedish - 82 pages

Yamaha YSP-3300 Additional guide - Swedish - 2 pages

Yamaha YSP-3300 User Manual - Swedish - 35 pages

Yamaha YSP-3300 User Manual - Spanish - 82 pages

Yamaha YSP-3300 Additional guide - Spanish - 2 pages

Yamaha YSP-3300 User Manual - Spanish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info