652632
95
Zoom out
Zoom in
Previous page
1/114
Next page
APPENDIX Troubleshooting En 95
No sound or sound is too low. Incorrect input or output cable connections. Connect the cable properly. 25
No appropriate input source has been selected. Select an appropriate input source with the input selector keys. 39
The volume is turned down. Turn up the volume. 39
The sound is muted.
Press the MUTE ( ) or VOL (+/-) key to resume audio output and adjust
the volume level.
39
There is input signal cannot be played back by this unit. Play a source whose signals can be reproduced by this unit. Change the
system settings of the source device.
110
“HDMI Audio Out” is set to “TV”. Set to “AMP”. 80
“HDMI Control” is set to “Off”. When connecting ARC (Audio Return Channel) supported TV and this unit
using an HDMI cable only, set “HDMI Control” to “On”.
80
To use this unit with “HDMI Control” set to “Off”, connect the TV’s audio
output jack to this unit’s TV (optical digital) input jack via the optical digital
audio cable.
24
Sound from an HDMI control-enabled TV is set for output from the TV’s
built-in speakers.
Use the TV’s HDMI settings to set audio output to any option other than the
TV’s built-in speakers.
No sound is coming from the subwoofer. Refer to the “No sound is coming from the subwoofer.” and “The volume of
the subwoofer is low.” problems.
96
Sound is intermittent. Audio output methods for surround playback were switched. Sound may be intermittent if the CINEMA DSP program is changed.
No sound or too small sound from
a specific channel.
The output level of the channel is muted. Raise the output level of the channel. 43, 77
The beam setting is inappropriate. Adjust the beam setting. 32, 72
The source is played in stereo playback mode. Switch to surround playback mode. 40, 42
Surround sound effects are
insubstantial.
When connecting this unit with playback device and TV digitally, the output
setting of the playback device and TV is not valid.
Refer to documentation supplied with your device and check the setting.
The playback device is set for constant output from 2 channels (PCM, etc.). Change the playback device’s audio output setting.
The listening room is not a regular shape, or the unit or listening position is
not at the center of the right and left wall of the listening room.
Relocate the unit or listening position.
14
There is no wall in the path of the sound beam. Place the sound reflection board in the path of the sound beam. 103
When “My Surround” is set to “On”, listening position is not in front of the
unit.
Listen in front of this unit.
76
Problem Cause Remedy See page
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YSP-2700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YSP-2700 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YSP-2700

Yamaha YSP-2700 User Manual - German - 114 pages

Yamaha YSP-2700 User Manual - Dutch - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info