516954
43
Zoom out
Zoom in
Previous page
1/59
Next page
41 En
Setup menu
PREPARATION
CONNECTION/
INITIAL SETTINGS PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Sub menu: HDMI1-3
Manually adjust the audio output delay applied to signals input
from the HDMI IN jacks. This setting is effective only when
“AUTO LIP SYNC” is set to “OFF”.
Adjustable range: 0 ms to 30 ms* to 300 ms
Sub menu: INPUT1/INPUT2/INPUT3
Adjust the audio output delay applied to signals input from the
INPUT1/INPUT2/INPUT3 jacks.
Adjustable range: 0 ms to 30 ms* to 300 ms
SOUND SETUP Dynamic Range Control
Use to adjust the dynamic range compression. Dynamic range is
the difference between the smallest sound that can be heard above
the noise of the equipment and the biggest sound that can be
heard without distortion.
Sub menu: Adaptive DRC
3)
Select whether to automatically adjust the dynamic range in
conjunction with the volume level. When this function is set to
“ON”, the dynamic range is adjusted as follows.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and
soft sound which is hard to be listened to is played back louder.
When the volume level is high:
Widen the dynamic range. From soft sound to loud sound, source
sound is played back without adjusting volume.
Selectable item: ON*, OFF
“ON”: Adjust dynamic range automatically.
4)
“OFF”: The dynamic range is not adjusted automatically.
Sub menu: Dolby/DTS DRC
Select the amount of dynamic range applied when this unit is
decoding Dolby Digital and DTS signals.
Selectable items: Min/Auto, Standard, Max*
Max: Outputs sound without adjusting the dynamic range of the
input signals.
5)
Standard: The dynamic range recommended for regular home
use.
Min/Auto:
(Minimum) Adjust the dynamic range for low volume or a quiet
environment, such as at night, for playing back bitstream signals
except for Dolby TrueHD signals.
(Auto) Adjust the dynamic range based on information from the
input signal when playing back Dolby TrueHD signal.
SOUND SETUP CHANNEL LEVEL
Use to adjust the volume of each channel with test tones.
6)
Sub menu:
Front L, Front R, Center, Surround L, Surround R,
Subwoofer
Adjustable range: -10.0 dB to +10.0 dB
SOUND SETUP SOUND OUT
Sub menu: CHANNEL OUT, SURROUND
Use to configure the number of output channels (5.1ch/7.1ch/
Auto) or audio output method. For details, see “Changing the
audio output method for surround playback” (p. 29).
Dynamic range control
On
On
Output level
Output level
Off
Off
Input level Input level
Volume : low Volume : high
Volume level of each channel with test tones
Sound out setting
Sound beam output configuration
When set to “ON”, “Dolby/DTS DRC” is automatically set to “Max”.
This setting is not available when the UniVolume is set to “ON”.
This makes the sound easier to hear when listening at low volume at
night, for example.
“Adaptive DRC” is automatically set to “OFF” when the settings other
than “Max” is selected.
When using My Surround function, Center, Surround L/R, Subwoofer
can be selected.
3) y
4) y
5) y
6) y
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YSP-2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YSP-2200 in the language / languages: English as an attachment in your email.

The manual is 4,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YSP-2200

Yamaha YSP-2200 User Manual - English - 2 pages

Yamaha YSP-2200 Quick start guide - German - 2 pages

Yamaha YSP-2200 User Manual - German - 59 pages

Yamaha YSP-2200 Quick start guide - Dutch - 2 pages

Yamaha YSP-2200 User Manual - Dutch - 59 pages

Yamaha YSP-2200 Quick start guide - French - 2 pages

Yamaha YSP-2200 User Manual - French - 59 pages

Yamaha YSP-2200 Quick start guide - Swedish - 2 pages

Yamaha YSP-2200 User Manual - Swedish - 59 pages

Yamaha YSP-2200 Quick start guide - Spanish - 2 pages

Yamaha YSP-2200 User Manual - Spanish - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info