652640
14
Zoom out
Zoom in
Previous page
1/76
Next page
PREPARATIONS a Installation En 14
Mounting the unit on a wall
The unit can be mounted on a wall.
If the antenna will be used (p. 13), raise it before
mounting the unit on a wall.
When installing the unit on a wall, all installation work must be
performed by a qualified contractor or dealer. The customer must
never attempt to perform this installation work. Improper or
inadequate installation could cause the unit to fall, resulting in
personal injury.
To prevent the unit from falling, attach it to a wall constructed of
drywall (plasterboard).
Make sure you use commercially available screws that can support
the weight of the installation (in step 2). Using clamps other than
specified screws, such as short screws, nails, and two-sided tape,
may cause the unit to fall.
Fix the cables in place where they will not become loose. If your foot
or hand accidentally gets caught on a loose cable, the unit may fall.
Check that the unit is fixed securely after the installation. Yamaha
will bear no responsibility for any accidents caused by improper
installations.
Do not lean on the unit or apply excessive force to the top of the
unit. Doing so may cause the unit to fall.
1
Attach the mounting template on a wall
and mark for the screw holes.
2
Remove the mounting template from the
wall and install the commercially available
screws at the marks on the wall.
3
Use the screws to attach the brackets
(both supplied).
4
Hang the unit on the screws.
MOUNTING TEMPLATE/GABARIT DE FIXATION
DRILL HERE / PERCER CIC
ANTENNA / ANTENNE
457mm (18” )
457mm (18 po)
ZR85910-1
DRILL HERE / PERCER CIC
Tapes or
thumbtacks
Mounting template (supplied)
Screw
holes
MOUNTING TEMPLATE/GABARIT DE FIXATION
DRILL HERE / PERCER CIC
ANTENNA / ANTENNE
457mm (18” )
457mm (18 po)
ZR85910-1
DRILL HERE / PERCER CIC
7 to 9 mm
(1/4" to 3/8")
2 to 4 mm
(1/16" to 3/16")
4 mm (#8)
20 mm (3/4") or more
Brackets
(supplied)
Position the
bracket so that
the protrusions
on the side of the
bracket fit into
the grooves on
the unit.
Screws
(supplied)
MOUNTING TEMPLATE/GABARIT DE FIXATION
DRILL HERE / PERCER CIC
ANTENNA / ANTENNE
457mm (18” )
457mm (18 po)
ZR85910-1
DRILL HERE / PERCER CIC
Bracket
mounting
holes
1 2 3 4 5 6
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YSP-1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YSP-1600 in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YSP-1600

Yamaha YSP-1600 User Manual - German - 76 pages

Yamaha YSP-1600 User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info