516969
44
Zoom out
Zoom in
Previous page
1/455
Next page
42 En
TROUBLESHOOTING
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the
instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest
authorized Yamaha dealer or service center.
Troubleshooting
General
Problem Cause Remedy
See
page
This unit does not
operate properly.
The internal microcomputer has been
frozen by an external electric shock (such
as lightning or excessive static electricity)
or by a power supply with low voltage.
Set this unit to the standby mode, disconnect the
AC power supply cable, plug it back in after 30
seconds, and use it normally.
This unit fails to turn on
when key is pressed,
or enters the standby
mode soon after the
power has been turned
on.
The AC power supply cable is not firmly
connected to the AC wall outlet.
Connect the AC power supply cable firmly to the
AC wall outlet.
8
This unit has been exposed to a strong
external electric shock (such as lightning
and strong static electricity).
Set this unit to the standby mode, disconnect the
AC power supply cable, plug it back in after 30
seconds, and use it normally.
This unit suddenly
enters the standby
mode.
The internal temperature becomes too high
and the overheat protection circuitry has
been activated.
Wait for about one hour for this unit to cool down
and turn it back on.
The sleep timer has turned the unit off. Turn on the power and play back the source again. 27
The power has shut down after wireless
was disconnected for a while during
“Interlock” is set to “On” using YID-W10.
Resume wireless connection or detect audio of
iPod/iPhone and turn on the unit.
No sound.
Incorrect input or output cable connections. Connect them with an HDMI connection or a
digital connection.
8, 9
No appropriate input source has been
selected.
Select an appropriate input source with INPUT key
or input selector keys.
20
The volume is turned down. Turn up the volume. 20
The sound is muted. Press MUTE or VOLUME +/- key to resume audio
output and adjust the volume level.
20
There is input signal cannot be played back
by this unit.
Play a source whose signals can be reproduced by
this unit. Change the system settings of the source
component.
“SUPPORT AUDIO” is set to “OTHER”. Set to “YRS-2100 (YRS-1100)”. 39
“HDMI CONTROL” is set to “OFF”. When connecting ARC (Audio Return Channel)
supported TV and this unit using HDMI cable only,
set “HDMI CONTROL” to “ON”.
39
Connect coaxial digital input jack and TV’s audio
output jack using a digital audio pin cable.
9
Headphones are connected to this unit.
The sound of effect
channel for cable
broadcasting may
become noise.
The source has a surround effect. Do not put surround effect by this unit.
No sound or too small
sound from a specific
channel.
The output level of the channel is muted. Raise the output level of the channel. 21, 37
The beam setting is inappropriate. Adjust the beam setting. 23
You play back the source in the stereo
mode.
Start surround playback.
22
Some audio output methods do not output
sound beams for certain channels.
Adjust the beam setting.
23
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YRS-2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YRS-2100 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 31,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YRS-2100

Yamaha YRS-2100 Quick start guide - English - 2 pages

Yamaha YRS-2100 Installation Guide - English - 2 pages

Yamaha YRS-2100 Quick start guide - German - 2 pages

Yamaha YRS-2100 Installation Guide - German - 2 pages

Yamaha YRS-2100 Quick start guide - Dutch - 2 pages

Yamaha YRS-2100 Installation Guide - Dutch - 2 pages

Yamaha YRS-2100 Quick start guide - French - 2 pages

Yamaha YRS-2100 Installation Guide - French - 2 pages

Yamaha YRS-2100 Installation Guide - Italian - 2 pages

Yamaha YRS-2100 Quick start guide - Swedish - 2 pages

Yamaha YRS-2100 Installation Guide - Swedish - 2 pages

Yamaha YRS-2100 Quick start guide - Spanish - 2 pages

Yamaha YRS-2100 Installation Guide - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info