516968
13
Zoom out
Zoom in
Previous page
1/455
Next page
11 En
Initial settings
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
ABOUT THIS UNIT English
CONNECTION/
INITIAL SETTINGS
This unit creates a sound field by reflecting sound beams on the
walls of your listening room and by broadening the cohesion of
all the channels. Just as you would arrange the speaker position of
other audio systems, you need to set the beam angle to enjoy the
best possible sound from this unit.
This unit employs the beam optimization and sound optimization
features with the aid of the supplied IntelliBeam microphone, allowing
you to avoid troublesome listening-based setup and achieving highly
accurate sound adjustments that best match your listening
environment. We call these two featuresIntelliBeam” generically.
Beam optimization:
This feature optimizes the beam angle so that the parameter best
matches your listening environment.
Sound optimization:
This feature optimizes the beam delay, volume, and quality so
that the parameters best match your listening environment.
This unit performs these two automatic optimizations with the aid
of the supplied IntelliBeam microphone.
2)
Follow the procedure below to connect the IntelliBeam
microphone to this unit and place it in a proper location.
Auto setup for appropriate
surround effects (IntelliBeam)
Installing the IntelliBeam microphone
1
Place the IntelliBeam microphone on a flat
level surface at your normal listening position.
Use the supplied cardboard microphone stand or a tripod
to place the IntelliBeam microphone at the same height as
your ears would be when you are seated.
Assembling the supplied cardboard
microphone stand
The AUTO SETUP procedure may not be run successfully if this
unit is installed in one of the rooms described in “Installing this
unit” on page 6. In such cases, run MANUAL SETUP (p. 14) to
manually adjust the corresponding parameters.
Do not connect the IntelliBeam microphone to an extension cable
as doing so may result in an inaccurate sound optimization.
After you have completed the AUTO SETUP procedure, be sure
to disconnect the IntelliBeam microphone.
The IntelliBeam microphone is sensitive to heat.
Keep the IntelliBeam microphone away from direct sunlight.
Do not place the IntelliBeam microphone on top of this unit.
Note
1 2 3
54
Remove
Fit in
Run
through
Place
horizontally
Fit in
Make sure that there are no obstacles between the
IntelliBeam microphone and the walls in your listening
room as these objects obstruct the path of sound beams.
However, any objects that are in contact with the walls
will be regarded as a protruding part of the walls.
2
Check if a supplied video pin cable is
connected and headphones are not
connected.
IntelliBeam microphone Upper limit
Within 1 m (3.3 ft)
Center height of this
unit
Cardboard microphone
stand
Within 1 m (3.3 ft)
Listening
position
1.8 m (6.0 ft)
or more
Lower limit
Center line
IntelliBeam
microphone
Cardboard microphone stand
“BEAM+SOUND OPTIMIZE” screen appears automatically when
the IntelliBeam microphone is connected. “BEAM OPTIMIZE
ONLY” or “SOUND OPTIMIZE ONLY” can be selected separately
in setup menu (p. 14).
Data set automatically can be saved in the system memory (p. 16).
You can save the several data depending on listening room and you
can change the setting conveniently.
2) y
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YRS-1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YRS-1100 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 31,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YRS-1100

Yamaha YRS-1100 Installation Guide - English - 2 pages

Yamaha YRS-1100 Quick start guide - English - 2 pages

Yamaha YRS-1100 Installation Guide - German - 2 pages

Yamaha YRS-1100 Quick start guide - German - 2 pages

Yamaha YRS-1100 Installation Guide - Dutch - 2 pages

Yamaha YRS-1100 Quick start guide - Dutch - 2 pages

Yamaha YRS-1100 Installation Guide - French - 2 pages

Yamaha YRS-1100 Quick start guide - French - 2 pages

Yamaha YRS-1100 Installation Guide - Italian - 2 pages

Yamaha YRS-1100 Quick start guide - Italian - 2 pages

Yamaha YRS-1100 Installation Guide - Swedish - 2 pages

Yamaha YRS-1100 Quick start guide - Swedish - 2 pages

Yamaha YRS-1100 Installation Guide - Spanish - 2 pages

Yamaha YRS-1100 Quick start guide - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info