419719
32
Zoom out
Zoom in
Previous page
1/684
Next page
AUTO SETUP (IntelliBeam)
30 En
The supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual listening
environment. Follow the procedure below to connect the IntelliBeam microphone to this unit and make sure that the
IntelliBeam microphone is placed in a proper location and that there are no large obstacles between the IntelliBeam
microphone and the walls in your listening room.
After you have completed the AUTO SETUP procedure, be sure to disconnect the IntelliBeam microphone.
The IntelliBeam microphone is sensitive to heat.
Keep it away from direct sunlight.
Do not place it on top of this unit.
Do not connect the IntelliBeam microphone to an extension cable as doing so may result in an inaccurate sound optimization.
An error may occur during the AUTO SETUP procedure if the IntelliBeam microphone is not properly placed in your listening room.
To avoid the possibility of an error:
Do not place the IntelliBeam microphone to the extreme right or left from the center of this unit.
Do not place the IntelliBeam microphone within 1.8 m (6.0 ft) from the front of this unit.
Do not place the IntelliBeam microphone more than 1 m (3.3 ft) upper or lower from the center height of this unit.
Make sure that there are no obstacles between the IntelliBeam microphone and the walls in your listening room as these objects
obstruct the path of sound beams. However, any objects that are in contact with the walls will be regarded as a protruding part of the
walls.
The best possible results are achieved if the IntelliBeam microphone is placed at the same height as your ears would be when you are
seated in your listening position. However, if this is not possible, you can manually fine-tune the sound beam angle and balance the
sound beam output levels using MANUAL SETUP (see page 53) once the AUTO SETUP procedure is completed.
1 Press STANDBY/ON to turn off the power of
this unit.
2 Connect the supplied IntelliBeam
microphone to the INTELLIBEAM MIC jack
underside of the front panel.
3 Place the IntelliBeam microphone on a flat
level surface more than 1.8 m (6.0 ft) from the
front of the unit and within 1 m (3.3 ft) upper
or lower from the center height of the unit
with the IntelliBeam microphone facing
upward at your normal listening position.
Be sure to place the IntelliBeam microphone on an
imaginary center line drawn from this unit.
y
You may want to use the supplied cardboard microphone
stand to affix the IntelliBeam microphone at the same height
as your ears would be when you are seated in your listening
position.
Installing the IntelliBeam microphone
Notes
STANDBY/ON
STANDBY/ON
or
Front panel
Remote control
Note
IntelliBeam
microphone
More than
1.8 m (6.0 ft)
Within 1 m (3.3 ft)
upper or lower
from the center
height
Cardboard
microphone stand
Sofa
Upper bound
position of the
microphone
Lower bound
position of the
microphone
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha yrs 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha yrs 1000 in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha yrs 1000

Yamaha yrs 1000 User Manual - German, Dutch, French, Italian, Swedish, Spanish - 684 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info