570889
97
Zoom out
Zoom in
Previous page
1/127
Next page
Accessory CD-ROM Installation Guide
YPT-410 Owner’s Manual 97
Troubleshooting
Is the USB cable connected correctly?
Check the USB cable connection. Disconnect the
USB cable, then connect it again.
Is the USB function enabled on your com-
puter?
When you connect the instrument to the
computer for the first time, if the “Add (Found)
New Hardware Wizard” or the “Found New
Hardware” window does not appear, the USB
function on the computer may be disabled.
Perform the following steps.
1 Select [Control Panel]* [System]
[Hardware] [Device Manager] (for Win-
dows 2000/XP), or select [Control Panel]
[Device Manager] (for Windows Vista).
* Classic View only in Windows XP.
2 Make sure that no “!” or “x” marks appear
at “Universal serial bus controller” or
“USB Root Hub”. If you see an “!” or “x”
mark, the USB controller is disabled.
Is any unknown device registered?
If driver installation fails, the instrument will be
marked as an “Unknown device”, and you will
not be able to install the driver. Delete the
“Unknown device” by following the steps below.
1 Select [Control Panel]* [System]
[Hardware] [Device Manager] (for Win-
dows 2000/XP), or select [Control Panel]
[Device Manager] (for Windows Vista).
* Classic View only in Windows XP.
2 Look for “Other devices” in the menu
“View devices by type”.
3 If you find “Other devices”, double-click it
to extend the tree to look for “Unknown
device”. If one appears, select it and click
the [Remove] button.
4 Remove the USB cable from the instru-
ment, and make the connection again.
5 Install the driver again.
•Windows 2000 users........ see page 95
•Windows XP users........... see page 95
•Windows Vista users ....... see page 96
Did you install the driver? (page 94)
Is the USB cable connected correctly?
•Are the volume settings of the instrument,
playback device, and application program set
to the appropriate levels?
•Have you selected an appropriate port in the
sequence software?
•Are you using the latest USB MIDI driver?
The latest driver can be downloaded from the
following web site.
http://music.yamaha.com/download/
Does your computer satisfy the system
requirements?
Is any other application or device driver run-
ning?
Do not suspend the computer while the MIDI
application is running.
If you are using Windows 2000, you may not be
able to suspend/resume normally, depending on
the particular environment (USB Host
Controller, etc.). Even so, simply disconnecting
and connecting the USB cable will allow you to
use the instrument functions again.
[Windows 2000/XP/Vista]
1 Start the computer and use the “Adminis-
trator” account to log on to Windows.
Close all applications and windows that are
open.
2 Insert the included CD-ROM into the CD-
ROM drive.
3 Select “My Computer” from the Start
menu.
4 Right-click the CD-ROM icon and select
“Open” from the pop-up menu.
5
Select “USBdrvVista_” or “USBdrv2k_”
folder “uninstall” folder “uninstall.exe”
file and launch the “uninstall.exe. file.
Follow the on-screen instructions to uninstall
the driver.
The driver cannot be installed.
When controlling the instrument from your
computer via USB, the instrument does not
operate correctly or no sound is heard.
Playback response is delayed.
Cannot suspend or resume the
computer correctly.
How can I remove the driver?
When using a 64-bit OS, click “uninstall_x64.exe.” from the
“USBdrvVista_” folder.
If the “User Account Control” window appears, click [Continue].
NOTE
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YPT-410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YPT-410 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YPT-410

Yamaha YPT-410 User Manual - German - 129 pages

Yamaha YPT-410 User Manual - Dutch - 127 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info