617838
83
Zoom out
Zoom in
Previous page
1/89
Next page
82
PSR-E303/YPT-300 Owner’s Manual / Bedienungsanleitung / Mode d’emploi / Manual de instrucciones
NOTE:
1 By default (factory settings) the instrument ordinarily
functions as a 16-channel multi-timbral tone generator,
and incoming data does not affect the panel voices or
panel settings. However, the MIDI messages listed
below do affect the panel voices, auto accompaniment,
and songs.
MIDI Master Tuning
System exclusive messages for changing the
Reverb Type and Chorus Type.
2 Messages for these control change numbers cannot be
transmitted from the instrument itself. However, they
may be transmitted when playing the accompaniment,
song or using the Harmony effect.
3 Exclusive
<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H
This message automatically restores all default set-
tings for the instrument, with the exception of MIDI
Master Tuning.
<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, ll,
mm, F7H
This message allows the volume of all channels to
be changed simultaneously (Universal System
Exclusive).
The values of “mm” is used for MIDI Master Volume.
(Values for “ll” are ignored.)
<MIDI Master Tuning> F0H, 43H, 1nH, 27H, 30H, 00H,
00H, mm, ll, cc, F7H
This message simultaneously changes the tuning
value of all channels.
The values of “mm” and “ll” are used for MIDI Master
Tuning.
The default value of “mm” and “ll” are 08H and 00H,
respectively. Any values can be used for “n” and “cc.
<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H,
mmH, llH, F7H
mm : Reverb Type MSB
ll : Reverb Type LSB
Refer to the Effect Map (page 84) for details.
<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H,
mmH, llH, F7H
mm : Chorus Type MSB
ll : Chorus Type LSB
Refer to the Effect Map (page 84) for details.
4 When the accompaniment is started, an FAH message
is transmitted. When accompaniment is stopped, an
FCH message is transmitted.When the clock is set to
External, both FAH (accompaniment start) and FCH
(accompaniment stop) are recognized.
5 Local ON/OFF
<Local ON> Bn, 7A, 7F
<Local OFF> Bn, 7A, 00
Value for “n” is ignored.
HINWEIS:
1 Im Standardbetrieb (Werkseinstellungen) funktioniert
das Instrument gewöhnlich als multi-timbraler 16-
Kanal-Klangerzeuger, und eingehende Daten haben
keinen Einfluß auf die Bedienfeld-Voices und die Bedi-
enfeld-Einstellungen. Die im folgenden aufgeführten
Befehle verändern jedoch dieBedienfeld-Voices, die
automatische Begleitung und die Songs.
MIDI Master Tuning
Systemexklusive Meldungen zum Umschalten von
Halltyp (Reverb Type) und Chorus-Typ.
2 Befehle für diese Controller-Nummern können nicht
vom Instrument selbst gesendet werden. Sie können
jedoch gesendet werden, wenn die Begleitung gespielt
oder der Harmony-Effekt verwendet wird.
3 Exclusive
<GM System ON> F0H, 7EH, 7FH, 09H, 01H, F7H
Durch diese Meldung werden automatisch alle
Werksvorgaben des Instruments, mit Ausnahme
des „MIDI Master Tuning“ (der Gesamtstimmung),
wieder hergestellt.
<MIDI Master Volume> F0H, 7FH, 7FH, 04H, 01H, ll,
mm, F7H
Mit diesem Befehl kann die Lautstärke aller Kanäle
gleichzeitig geändert werden (Universal System
Exclusive).
Die Werte für „mm“ werden für MIDI Master Volume
verwendet. (Werte für „ll“ werden ignoriert.)
<MIDI Master Tuning> F0H, 43H, 1nH, 27H, 30H, 00H,
00H, mm, ll, cc, F7H
Durch diesen Befehl wird der Stimmungswert für
alle Kanäle gleichzeitig geändert.
Die Werte von „mm“ und „ll“ werden für MIDI Master
Tuning verwendet.
Der Standardwert beträgt für „mm“ 08H und für „ll“
00H. Für „n“ und „cc“ können beliebige Werte ver-
wendet werden.
<Reverb Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 00H,
mmH, llH, F7H
mm : Reverb Type MSB
ll : Reverb Type LSB
Weitere Einzelheiten hierzu finden Sie in der Effekt-
Zuordnungstabelle (Seite 84).
<Chorus Type> F0H, 43H, 1nH, 4CH, 02H, 01H, 20H,
mmH, llH, F7H
mm : Chorus Type MSB
ll : Chorus Type LSB
Weitere Einzelheiten hierzu finden Sie in der Effekt-
Zuordnungstabelle (Seite 84).
4 Beim Starten der Begleitung wird eine FAH-Meldung
gesendet. Wenn die Begleitung gestoppt wird, wird die
Meldung FCH ausgegeben. Wenn die Clock auf
„External“ eingestellt ist, werden sowohl FAH
(Begleitung Start) als auch FCH (Begleitung Stop)
erkannt.
5 Local ON/OFF
<Local ON> Bn, 7A, 7F
<Local OFF> Bn, 7A, 00
Der Wert für „n“ wird ignoriert.
MIDI Data Format / MIDI-Datenformat /
272
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YPT-300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YPT-300 in the language / languages: French as an attachment in your email.

The manual is 8,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YPT-300

Yamaha YPT-300 User Manual - English - 84 pages

Yamaha YPT-300 User Manual - German - 89 pages

Yamaha YPT-300 User Manual - Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info