557273

Yamaha YIT-W10 Manual

7
Zoom out
Zoom in
Previous page
1/64
Next page
5 En
■ Troubleshooting
Refer to the table below if the unit does not function properly. If the problem you are experiencing is not listed
below, or if the instruction below does not help, contact the nearest authorized Yamaha dealer or service center.
Problem Cause Remedy
No sound. PDX-50TX and another Yamaha
product are not connected since they
are set to different groups.
Set both PDX-50TX and another
Yamaha product to the same group.
The signals are obstructed because
there is an obstacle between the
transmitting-side product and this
unit.
Remove the obstacle.
Move this unit to another position. If
the device is IEEE802.11n-
compliant, change the channel
setting of the device so as not to
affect the unit.
There is a device (microwave oven,
wireless LAN, etc.) outputting signals
in 2.4 GHz frequency band nearby.
Move PDX-50TX away from the
device.
The iPod or iPhone is not connected
to PDX-50TX firmly.
Connect the iPod or iPhone firmly.
The firmware of the iPod or iPhone is
not updated.
Download the latest iTunes software
to update the firmware of the iPod or
iPhone. For details, refer to the
owner’s manual supplied with your
iPod or iPhone.
The signal from PDX-50TX is
blocked by your body or metallic
objects, etc.
Change the way of holding,
orientation, or position of PDX-
50TX to avoid the object blocking
the signal.
The battery of iPod or iPhone is low. Charge the iPod or iPhone.
The volume is turned down. Turn up the volume.
It is in the process of a connection. Please wait for a while.
The protection circuitry has been
activated by excessive volume.
Turn down the volume.
Controlling
volume on the iPod
or iPhone does not
work.
The iPod or iPhone being used is not
supported by this unit.
Use an iPod or iPhone supported by
this product.
The iPod or iPhone is not connected
to PDX-50TX firmly.
Connect the iPod or iPhone firmly.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YIT-W10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YIT-W10 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info