484110

Yamaha YHT-S401 Manual

27
Zoom out
Zoom in
Previous page
1/275
Next page
25 En
ADDITIONAL
INFORMATION
English
ADDITIONAL INFORMATION
Refer to the chart below should this unit not function properly.
If the problem you are experiencing is not listed below, or if the instruction below does not help, set this unit to the
standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service
center.
Check the below first.
1 The AC power supply cable of this unit, TV and external components (such as BD player) are firmly connected to the
AC wall outlet.
2 The power supply of this unit, TV and the external components (such as BD player) are turned on.
3 All cables are firmly connected to their respective jacks on each component.
Troubleshooting
Problem Cause Solution
See
page
Power turns on but
immediately shuts off.
The power cable may be connected
improperly.
Make sure the power cable is plugged into the
outlet firmly.
8
A speaker cable may be shorted. Make sure all speaker cables are connected
properly.
8
This unit may have received a strong
electrical shock, such as from a
lightening bolt or excessive static
electricity.
Set this unit to standby mode, and then
disconnect the power cable. Wait for about 30
seconds, connect the power cable, and then turn
the unit on again.
10
The speakers make no
sound.
The volume may be set to minimum
level.
Adjust the volume level.
10, 19
The mute function may be activated. Cancel the mute function. 10
The input source or input setting may be
incorrect.
Select the correct input source or input setting.
10
The cables may be connected improperly. Make sure all cables are connected properly. 8
“3-2:AUDIO” in the setup menu
“3:HDMI SETUP” is set to “TV”.
Set “3-2:AUDIO” in the setup menu “3:HDMI
SETUP” to “AMP”.
19
“3-1:CONTROL” in the setup menu
“3:HDMI SETUP” is set to “OFF” in
setup menu.
When connecting ARC (Audio Return Channel)
supported TV and this unit using HDMI cable
only, set “3-1:CONTROL” in the “3:HDMI
SETUP” to “ON”.
19
Connect coaxial digital input jack and TV’s
audio output jack using a digital audio pin cable.
9
The headphone is connected.
Sound is too low on
one side.
The cables may be connected improperly. Make sure all cables are connected properly.
8
Speaker channels
other than the front
ones make no sound.
You may be listening to stereo sounds
without surround mode.
Press the SURROUND button to play back in
sound mode.
11
“1:SP LEVEL” in the setup menu
“1-4:SURROUND L”/“1-5:SURROUND R”
is set to minimum level.
Adjust “1:SP LEVEL” in the setup menu
“1-4:SURROUND L”/“1-5:SURROUND R”. 19
“5-1:SP CHANNEL” is set to “2CH” or
“3CH” in setup menu.
Set “5-1:SP CHANNEL” to “4CH” or “5CH”.
20
The subwoofer makes
no sound.
The volume of the subwoofer channel
may be set to minimum level.
Adjust the volume level of the subwoofer.
5, 19
The source does not contain low-
frequency signals.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YHT-S401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YHT-S401 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 13,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info