484108
11
Zoom out
Zoom in
Previous page
1/31
Next page
11 En
Placing
PREPARATION
Attaching the speaker to a wall
Installing the speaker using the keyholes
You can attach the speaker to a wall using
commercially available screws (#8, Diameter: 7 to 9
mm (1/4” to 3/8”)).
1 Attach the supplied mounting template on
a wall and mark the holes of the mounting
template.
2 Remove the mounting template and then
install the commercially available screws
at the marks.
3 Hang the speaker on the screws using the
keyholes on the back of the speaker.
Installing the speaker using the screw
holes
You can also use the screw holes on the rear of the
speaker for installing the speaker using a
commercially available rack etc.
Attach the speaker to a rack or wall. Do not attach the
speaker to a wall that is made of weak materials such as
plaster or veneered woods. Doing so may cause the
speaker to fall.
Use commercially available screws that can support the
weight of the installation.
Make sure you use specified screws to attach the speaker.
Using clamps other than specified screws, such as short
screws, nails, or two-sided tape, may cause the speaker to
fall.
When connecting the speaker, fix the speaker cables in
place where they will not become loose. If your foot or
hand accidentally gets caught on a loose speaker cable, the
speaker may fall.
• After attaching the speaker, check that the speaker is fixed
securely. Yamaha will bear no responsibility for any
accidents caused by improper installations.
When installing the speaker on a wall, all
installation work must be performed by a
qualified contractor or dealer. The customer
must never attempt to perform this installation
work. Improper or inadequate installation could
cause the speaker to fall, resulting in personal
injury.
Tapes or thumbtacks
Mark
4 to 6 mm (3/16” to 1/4”)
Diameter:
7 to 9 mm or
more (#8, 1/4”
to 3/8” or more)
Notes
Screw holes
Hole depth: 14 mm (9/16”)
Diameter: 6 mm (1/4”)
Pitch: 256 mm (10-1/16”)
256 mm
(10-1/16”)
37 mm (1-7/16”)
Rack etc.
14 mm (9/16”)
Screw
(M6)
Screw
hole
Min 7 mm (1/4”)
NS-BR300
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YHT-S400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YHT-S400 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YHT-S400

Yamaha YHT-S400 User Manual - German - 29 pages

Yamaha YHT-S400 User Manual - Dutch - 29 pages

Yamaha YHT-S400 User Manual - French - 31 pages

Yamaha YHT-S400 User Manual - Italian - 29 pages

Yamaha YHT-S400 User Manual - Swedish - 29 pages

Yamaha YHT-S400 User Manual - Spanish - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info