599699
59
Zoom out
Zoom in
Previous page
1/70
Next page
Keyboard Stand Assembly
Owner’s Manual
59
ENGLISH
1. Attach the adjuster to C.
1-1 Align the tip of the adjuster with the screw hole,
then screw in the adjuster all the way until it
stops turning.
You will adjust the height of the adjuster in Step
8.
1-2 Untie and straighten out the bundled cord.
Don’t discard the vinyl tie, you’ll need it later in
Step 7.
2. Attach (finger-tighten) D and E to C.
2-1 Align D and E with each end of C.
2-2 Attach D and E to C by finger-tightening the long
screws (6 x 20mm).
3. Attach B.
3-1 Place the lower side of B on each foot of D and E,
then attach the upper side to D and E.
3-2 Attach the top of B to D and E by finger-tighten-
ing the thin screws (4 x 12mm).
3-3 While pushing the lower outside part of D and E
towards each other, secure the bottom of B at
each end using two tapping screws (4 x 20mm).
3-4 Insert the other two tapping screws (4 x 20mm)
into the other two screw holes to secure B.
3-5 While pushing D and E towards each other,
securely tighten the screws that were finger-tight-
ened in Step 3-2.
4. Secure C.
Securely tighten the screws on C that were
attached in Step 2-2.
C
1-1
1-2
2-2
D
E
C
B
E
D
3-2
3-5
3-3
3-4
3-1
B
D
E
C
4
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YDP-181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YDP-181 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YDP-181

Yamaha YDP-181 User Manual - English - 6 pages

Yamaha YDP-181 User Manual - English - 4 pages

Yamaha YDP-181 User Manual - German - 68 pages

Yamaha YDP-181 User Manual - German - 4 pages

Yamaha YDP-181 User Manual - Dutch - 68 pages

Yamaha YDP-181 User Manual - Danish - 68 pages

Yamaha YDP-181 User Manual - French - 70 pages

Yamaha YDP-181 User Manual - French - 4 pages

Yamaha YDP-181 User Manual - Italian - 68 pages

Yamaha YDP-181 User Manual - Polish - 68 pages

Yamaha YDP-181 User Manual - Portuguese - 68 pages

Yamaha YDP-181 User Manual - Swedish - 68 pages

Yamaha YDP-181 User Manual - Spanish - 4 pages

Yamaha YDP-181 User Manual - Spanish - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info