599699
49
Zoom out
Zoom in
Previous page
1/70
Next page
Detailed Settings – [FUNCTION]
Owner’s Manual
49
ENGLISH
Control Change ON/OFF
Normally the instrument will respond to MIDI control
change data received from an external MIDI device or
keyboard, causing the voice on the corresponding chan-
nel to be affected by pedal and other “control” settings
received from the controlling device (the keyboard voice
is not affected).
The instrument also transmits MIDI control change
information when the pedal or other appropriate con-
trols are operated.
This function makes it possible to cancel control change
data reception and transmission so that, for example, the
instrument’s pedal and other controls can be operated
without affecting an external MIDI device.
Setting range: ON/OFF
Normal setting: ON
F7.6
Panel/Status Transmit
This function causes all the current instrument panel set-
tings (selected voice, etc.) to be transmitted via the MIDI
OUT terminal.
Procedure
1. Set up the panel controls as desired.
2. Connect the instrument to a sequencer via MIDI, and
set up the sequencer so it can receive the setup data.
3. Engage the Function mode and select .
4. Press the
[+/YES] button to transmit the panel/status
data.
will appear on the LED display when the data has
been successfully transmitted.
F6.7:
Initial Setup Send
This function lets you send the data of the panel settings
to a computer. By transmitting the panel settings and
recording them on the MIDI sequence recorder prior to
the actual performance data, the instrument will be
automatically restored to the same settings when the per-
formance is played back. You can also use this function to
change the settings of a connected tone generator to the
same settings as the instrument.
Procedure
1. Set up the panel controls as desired.
2. Connect the instrument to a sequencer via MIDI, and
set up the sequencer so it can receive the setup data.
3. Engage the Function mode and select .
4. Press the
[+/YES] button to transmit the panel/status
data.
will appear on the LED display when the data has
been successfully transmitted.
The following data can be sent.
•Voice selection
[REVERB] type
[REVERB] depth
[EFFECT] type
[EFFECT] depth
•Tuning (F1)
•Dual detune (F3.2)
NOTE
For information on control changes that can be used with the instru-
ment, refer to the MIDI Data Format in our manual library at the fol-
lowing website.
http://www.yamaha.co.jp/manual/
TERMINOLOGY
Setup Data:
Data that contains a set of panel settings for the instrument.
NOTE
For a list of the “Panel Data Contents” transmitted by this function,
refer to our manual library at the following website.
http://www.yamaha.co.jp/manual/
NOTE
Receiving the transmitted data:
1. Connect the instrument via MIDI to the device to which the setup
data was transmitted previously.
2. Start sending the setup data from the device.
The instrument automatically receives the setup data, which will be
reflected in the panel settings.
(For the data to be accepted, the instrument that receives the setup
data should be the same model as the one that transmitted the
setup data to the sequencer.)
NOTE
For more information on transmitting and receiving setup data via
MIDI, refer to the owner’s manual for the connected MIDI device.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha YDP-181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha YDP-181 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha YDP-181

Yamaha YDP-181 User Manual - English - 6 pages

Yamaha YDP-181 User Manual - English - 4 pages

Yamaha YDP-181 User Manual - German - 68 pages

Yamaha YDP-181 User Manual - German - 4 pages

Yamaha YDP-181 User Manual - Dutch - 68 pages

Yamaha YDP-181 User Manual - Danish - 68 pages

Yamaha YDP-181 User Manual - French - 70 pages

Yamaha YDP-181 User Manual - French - 4 pages

Yamaha YDP-181 User Manual - Italian - 68 pages

Yamaha YDP-181 User Manual - Polish - 68 pages

Yamaha YDP-181 User Manual - Portuguese - 68 pages

Yamaha YDP-181 User Manual - Swedish - 68 pages

Yamaha YDP-181 User Manual - Spanish - 4 pages

Yamaha YDP-181 User Manual - Spanish - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info